troubleshooting all the issue with the zenith, a 1950x and 1080 ti

[Arne Saknussemm]

OK so memory definitely unstable...

Best reinstall windows as per above....only one or two sticks memory at F5 defaults with voltage set to 1.35v

[masterac]

OK so memory definitely unstable...

Best reinstall windows as per above....only one or two sticks memory at F5 defaults with voltage set to 1.35v

What is weird its that its the file you send me that i can uncompress, all the rest are fine, also i have been doing a memtest86 a default for the last 5 hours and no issue....yet



What is weird is that the monitor lost signal after 20-30 minutes i started it, so i had to rebot and start it again

[masterac]

Also here is a bunch of info from the memetest interface

[Arne Saknussemm]

You are using an outdated (latest Memtest 86 version is 7.5) version of an entirely different test

HCI memtest http://hcidesign.com/memtest/.....

Programs to open multiple instances

http://www.overclock.net/forum/10-am...l#post26419580
http://www.overclock.net/forum/10-am...l#post26516795

However, with the best will in the world, if you are not willing to answer the questions asked or willing/able to try the troubleshooting steps people recommend then these threads seem a bit pointless

[masterac]

You are using an outdated (latest Memtest 86 version is 7.5) version of an entirely different test

HCI memtest http://hcidesign.com/memtest/.....

Programs to open multiple instances

http://www.overclock.net/forum/10-am...l#post26419580
http://www.overclock.net/forum/10-am...l#post26516795

However, with the best will in the world, if you are not willing to answer the questions asked or willing/able to try the troubleshooting steps people recommend then these threads seem a bit pointless

i don't get it, the meme test is the 7.5, you can see it in the screenshot i posted so why do you say its outdated ? they all got the same name so its a bit hard to know wich one is correct, just started the test with your version

[masterac]

almost 400 %, dev say its minimum to check for error, still nothing

[masterac]

One of the test is almost at 600 % , xhile the reste of them are at 400% what does that mean ? Still no error, but isnt it weird that some ram may be faster than the rest ?

[Arne Saknussemm]

The program divides up the memory....one piece will be smaller...so will be covered faster.

What settings are you testing?

[masterac]

The program divides up the memory....one piece will be smaller...so will be covered faster.

What settings are you testing?

i just check the log, its a micro bug, sometime it jump from the ongoing to a higher number, and the soft keep only the higher number display, the ongoing was same as the other

ram was at default in bios, 2133mhz

i just press start testing, its the pro version so it did test all available ram and was pushing cpu at 100%

i stop it when i hit 500 % on all of them, since the dev said 400 % was enough

but i am starting to have doubt about the motherboard, i use some logitech brio with my computer, and i had to use active usb cable because max lenght of usb type c cable is 2 max.

but what i discovered from time to time is that some webcam would sometime have bad video, missing part of bottom or top frame, like its a bad signal, at first i thought than one of the cable i use is defective, but without changing anything so turn off and back on obs it would be fix.

and lately i tried to use my front usb port to connect my nikon to acces the memory card, i did the same thing 3 week ago and it work without any issue, but today, the transfere wouln't work for more than one picture, it would just freeze out, and sometime a pic would go throught if i did it one at the time, but sometime it didn't, and this time there is no active usb cable with another one, its a simple cable that work for my external drive and all, so its the usb that the issue, and i didn't update any driver at all.

so i guess i need to reinstall windows to try to see if the issue still happen, but first i want to be sure the ssd is fine, and that also an issue with the motherboard, i can only run it in x4 instead of x8, otherwise i get a reboot before bios

any idea ?

[Arne Saknussemm]

I don't understand the SSD...where is it..in M2 chipset position or on DIMM2...either way I'm pretty sure x4 is the normal and maximum connection speed for any of these M2 SSDs

OK I'll ask again...what settings for the RAM?

2133 default with voltage to 1.35? or default 1.2?

Either way...yes, it would be best to reinstall windows at stable defaults with minimum connections....then set up displays and then slowly other devices.

However, before you do that....since the install may be a bit corrupted, I would try and test the settings G.Skill sent you on the OS first....no point making a clean install and then setting RAM to some settings that might be unstable...

I would be careful with USB devices and those sort of symptoms...if you are feeding current to board with something defective you can do damage...