ASUS RAMPAGE IV EXTREME BIOS 4901 MODDED With 0713 Microcode patch here!

[restsugavan]

Thank you!
I use C1 stepping of 3960x - that`s the one i got in retail box years ago.

I used this R4E206.CAP and managed to successfully flash it and POST. it now shows microcode patch 61d - is that the latest one for that stepping? no 714 available?

Currently I think of flashing ME firmware however I found a lot of information about how to remove it and thinking of pros/cons of doing that.

PS. One more question: does R4E206.CAP contains these updates:
+ Update SATA OROM to 15.1.0.2525 support NVME SSD on PCI add on
+ Update LAN Legacy ROM to lastest
+ Update ASMedia 106X to 0.95.1
?

Thanks!

ํYou're welcome. R4E206.CAP contained lastest Sandy Bridge E/EP C0/C1 stepping microcode 061D date 2018-05-08 buddy.
The 061D microcode protected against CVE-2018-3639/3640 and all vunerables.
See also https://www.intel.com/content/dam/ww...e-guidance.pdf

Note :: Your C0/C1 Sandy Bridge E CPU use the same CPUID 206D6 as XEON E5 Sandy Bridge EP/EN on the pdf files.

+ Update SATA OROM to Intel lastest 16.7.0.3513
+ Update EFI to Intel lastest 16.7.0.3513
+ Update Intel 82579V Legacy ROM to 0.0.19
+ Update Intel Lan Agent to 0.0.13
+ Update ASMedia 106X to 3.8.0 (2018 Updated)

[micax]

ํYou're welcome. R4E206.CAP contained lastest Sandy Bridge E/EP C0/C1 stepping microcode 061D date 2018-05-08 buddy.
The 061D microcode protected against CVE-2018-3639/3640 and all vunerables.
See also https://www.intel.com/content/dam/ww...e-guidance.pdf

Note :: Your C0/C1 Sandy Bridge E CPU use the same CPUID 206D6 as XEON E5 Sandy Bridge EP/EN on the pdf files.

+ Update SATA OROM to Intel lastest 16.7.0.3513
+ Update EFI to Intel lastest 16.7.0.3513
+ Update Intel 82579V Legacy ROM to 0.0.19
+ Update Intel Lan Agent to 0.0.13
+ Update ASMedia 106X to 3.8.0 (2018 Updated)

Thanks a lot! will it allow me to boot with nvme pci-ex?

[restsugavan]

Thanks a lot! will it allow me to boot with nvme pci-ex?

Yes! Let's trying .

[micax]

Yes! Let's trying .

Hey! today I tried to boot with 960 evo w pci-e adapter - with no success, it won`t come up in a bios even it`s working flawless after OS from another drive loads.
Is it possible to add nvme support to this bios as described here https://www.win-raid.com/t2844f44-OF...-Bios-mod.html ?
Thanks!

[_BrahmastriK_]

Hello . Tell me: your BIOS mod works with ivy bridge e