03-12-2018 06:16 PM - last edited on 03-06-2024 08:57 PM by ROGBot
03-12-2018 07:50 PM
03-13-2018 08:15 AM
Nate152 wrote:
Hi Drecan
Sure I'll give you a hand overclocking your cpu, before we begin I want to say the quality of your cpu and cooling will determine how far you can go. You have a good cooler so that's a good start.
First you'll need a monitoring program and a stress testing program, would you have any installed ?
If not I'll recommend HWinfo for hardware monitoring and ROG Realbench for stress testing.
HWinfo - Click the green "Download Installer" in the middle.
https://www.hwinfo.com/download.php
ROG Realbench
https://rog.asus.com/rog-pro/realbench-v2-leaderboard/
If you have a hardware monitoring program and stress testing program already installed, list what you have.
03-22-2018 01:20 PM
Nate152 wrote:
Hi Drecan
Sure I'll give you a hand overclocking your cpu, before we begin I want to say the quality of your cpu and cooling will determine how far you can go. You have a good cooler so that's a good start.
First you'll need a monitoring program and a stress testing program, would you have any installed ?
If not I'll recommend HWinfo for hardware monitoring and ROG Realbench for stress testing.
HWinfo - Click the green "Download Installer" in the middle.
https://www.hwinfo.com/download.php
ROG Realbench
https://rog.asus.com/rog-pro/realbench-v2-leaderboard/
If you have a hardware monitoring program and stress testing program already installed, list what you have.
03-13-2018 08:25 AM
03-13-2018 09:52 AM
03-13-2018 10:01 AM
03-13-2018 10:13 AM
03-13-2018 10:19 AM
03-13-2018 10:27 AM
Nate152 wrote:
Thank you
We want to see the maximums for all readings.
At auto it's drawing 1.296v with core 3 hitting 77c, that's not too bad.
Before we overclock your cpu, I see your ram is up to speed at 3200MHz with CL14, nice !
On the Extreme tweaker tab change these two voltages...
CPU VCCIO voltage - enter in 1.15v
CPU System Agent voltage - enter in 1.15v
F10 and enter to save and exit.
You can run the Realbench benchmark again to see it's stable, if it is we'll move on to overclocking your cpu.
Post a screenshot with the maximums and confirm if you passed the benchmark after changing the two voltages.