Results 1 to 10 of 16
-
03-16-2018 10:41 AM #1ROG Junior Member Array
- Join Date
- Feb 2018
- Reputation
- 10
- Posts
- 4
Asus Maximus X Hero overclock issue
Hi guys,
I'm new to OC and I followed the guide here:
https://www.youtube.com/watch?v=CoUt...21040719801727
I'm able to archived 5Ghz@1.37V LLC 5 stable in Prime26.6 and Realbench 8 hours stress test, but I'm having problem when I try to cold boot my pc. It will always stuck on ROG splash screen until I press the reset button and it will boot(warm boot).
I found the temporary solution which is enable the CPU SVID support but it rises my vcore by a lot.
Is there any other solution for this issue?
Spec:
8700K delided
Maximus X hero
16gb 3200mhz RAM
Samsung 960 evo 250gb
750W gold psu
Thanks in advance.
-
03-16-2018 10:46 AM #2ROG Guru: Gold Belt Array Menthol PC Specs
Menthol PC Specs Motherboard M 10 Apex / XI gene Processor 8700K / 9900K Memory (part number) 2x8 Gskill Trident Z 4266/2x2x8 Gskill Trident Z 4500 Graphics Card #1 RTX 2080ti / GTX 1060 Sound Card SoundBlaster Ae5 / Onboard Monitor BENQ 32" 4K Storage #1 Intel 900p 480GB/Samsung 960 Pro 1TB Storage #2 Intel 750 1.2TB/Plextor 1 TB 2X 950 Pro CPU Cooler Corsair H150i AIO / H1110i Case Corsair 740 ? Lian Li Air Power Supply Corsair AX 1200i / AX 1200i Keyboard Corsair Mouse ASUS Strix Headset HyperX Cloud Alpha Mouse Pad ASUS Headset/Speakers Logitech Z906 OS 10 X64 Pro Network Router Verizon Fios Accessory #1 Intel Wifi BT pcie card Accessory #2 Red Bull Accessory #3 English Breakfast Tea
- Join Date
- Jan 2012
- Reputation
- 241
- Posts
- 4,548
Use adaptive voltage, which requires SVID to be enabled
-
03-16-2018 10:52 AM #3ROG Junior Member Array
- Join Date
- Feb 2018
- Reputation
- 10
- Posts
- 4
If I use adaptive mode instead of manual, my voltage should set to 1.37 too?
Originally Posted by Menthol
-
03-16-2018 11:50 AM #4ROG Guru: Gold Belt Array Menthol PC Specs
Menthol PC Specs Motherboard M 10 Apex / XI gene Processor 8700K / 9900K Memory (part number) 2x8 Gskill Trident Z 4266/2x2x8 Gskill Trident Z 4500 Graphics Card #1 RTX 2080ti / GTX 1060 Sound Card SoundBlaster Ae5 / Onboard Monitor BENQ 32" 4K Storage #1 Intel 900p 480GB/Samsung 960 Pro 1TB Storage #2 Intel 750 1.2TB/Plextor 1 TB 2X 950 Pro CPU Cooler Corsair H150i AIO / H1110i Case Corsair 740 ? Lian Li Air Power Supply Corsair AX 1200i / AX 1200i Keyboard Corsair Mouse ASUS Strix Headset HyperX Cloud Alpha Mouse Pad ASUS Headset/Speakers Logitech Z906 OS 10 X64 Pro Network Router Verizon Fios Accessory #1 Intel Wifi BT pcie card Accessory #2 Red Bull Accessory #3 English Breakfast Tea
- Join Date
- Jan 2012
- Reputation
- 241
- Posts
- 4,548
Yes, set SVID Behavior to Best Case Scenario, SVID to Auto or Enabled, LLC 5 or 6 and enter the same voltage that works in manual mode in Additional Turbo Mode CPU Core Voltage, Offset Voltage Auto, this should get you real close
-
03-16-2018 12:08 PM #5ROG Junior Member Array
- Join Date
- Feb 2018
- Reputation
- 10
- Posts
- 4
Ok, I will try it and see how it goes. Thanks for the help Originally Posted by Menthol
-
03-18-2018 09:49 AM #6ROG Guru: Yellow Belt Array XYchromosone PC Specs
XYchromosone PC Specs Motherboard ASUS Maximux XI Extreme [BIOS 1302] Processor i9 9900K Memory (part number) G-Skill Trident Z RGB CL17 3600MHz 32GB [4x8] Graphics Card #1 ASUS ROG Strix Gaming GTX1080Ti 11GB Monitor AOC AGON AG271QG 27" 165Hz Storage #1 Samsung 970 Pro NVMe 1TB M.2 SSD CPU Cooler Thermaltake Floe Riing 360 Premium AIO Case Fractal Design Define R6 Black Power Supply Corsair AX1600i Keyboard RAZER Blackwidow X Tournament Chroma Mouse RAZER Lancehead [ambidextrous] Chroma Headset Sennheiser RS165 Wireless Headset/Speakers Sennheiser CX 100 inner ear headphones OS Windows 10 Pro x64 + UbuntuStudio 18.04 Network Router ASUS DSL-AC68U on ADSL2+, Technicolor DJA0230TLS Gateway NETGEAR CABLE ADAPTER CM450
- Join Date
- Dec 2015
- Reputation
- 30
- Posts
- 201
did you get a chance to try it? how did it all go? Originally Posted by Js4uuu
Ok, I will try it and see how it goes. Thanks for the help
-
03-19-2018 08:35 PM #7ROG Member Array
- Join Date
- Mar 2018
- Reputation
- 10
- Posts
- 12
I have exactly the same problem as OP, i did every step from that video, ended up with 4,8ghz 1,22v LLC6, did exactly what you said here, cold boot is fixed but vcore is much higher then it should be, it goes as high as 1,48v, it's exactly the same as i would enable svid support alone. Originally Posted by Menthol
-
03-20-2018 10:38 PM #8ROG Member Array
- Join Date
- Mar 2018
- Reputation
- 10
- Posts
- 12
Any other suggestions?
-
03-21-2018 08:12 AM #9Administrator Array
- Join Date
- Mar 2016
- Reputation
- 124
- Posts
- 1,831
double post
-
03-21-2018 08:13 AM #10Administrator Array
- Join Date
- Mar 2016
- Reputation
- 124
- Posts
- 1,831
If using adaptive you may need to use a negative offset to get closer to the desired voltage, as it is not possible to set a value lower than the minimum VID for a given ratio.
Reply With Quote
