Help
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 

[Trident Z] F4-3000C14D-32GTZ with Asus ROG STRIX Z270E GAMING XMP Problem.

Matten7
Level 7

‎04-20-2018 11:27 AM

I have tried the default XMP for this ram, and i have the latest Bios for this motherboard. But i cannot get my PC to boot with XMP enabled. Ram works fine at 2133Hz. I tested both sticks one at a time in slot A2 with XMP enabled. They both work if I only have one stick in at a time. If i put them both in, one in A2 one in B2, and enable XMP it does not boot. Obviously I would like for both of them to work. The strange part is the memory ( F4-3000C14D-32GTZ) has the STRIX Z270E GAMING motherboard on the QVL. But on the asus website the memory is not on the QVL for the motherboard.
Labels:
0 Kudos
2,024 Views
4 REPLIES 4

davemon50
Level 11

‎04-20-2018 01:02 PM

XMP default changes my BLCK to 125 on my board. How about yours? You might have to manually change to 100 and/or manually adjust to the mfg's recommended timings.
Davemon50
0 Kudos

Matten7
Level 7

‎04-20-2018 01:32 PM

It defaults to 100
0 Kudos

Silent_Scone
Super Moderator

‎04-20-2018 10:57 PM

Memory QVL is there to help you get the best possible chance of stability, however, every CPU is different. Try setting the following:

VCCIO: 1.2v

VCCSA (System Agent): 1.2v

If still no POST

CAS Latency: 15

DRAM Voltage: 1.4v
13900KS / 8000 CAS36 / ROG APEX Z790 / ROG TUF RTX 4090
0 Kudos

Matten7
Level 7

‎04-21-2018 06:51 AM

That seemed to work. Thanks
0 Kudos