Deleted

[MoKiChU]

...

[jdelbs18]

Hello everyone,

The goal of this thread is to post new versions of AURA Sync

Is this where we post errors too? Didn't see a specific thread.

Either way, Hero IX MOBO, GTX 1080 TI ASUS and TRIDENT RGB RAM, still same issue since original aura version. Only detects GPU. No mobo or RAM. Did everything everyone always tells me to do... uninstall, reboot, aura cleaner, reboot, power down and unplug, install new aura, reboot, power down and unplug, reboot, run as admin on everything including the start up, AURA actually comes up, but only shows GPU.

Asus, I'm very sad you guys can't figure out software. Hire people that can please. This stuff could be so good. I hate AURA and am recommending many friends to stay away from ASUS because you can't fix sometime so basic and simple. I haven't had all 3 RBG sets working since the month I built my PC over a year ago. This is very sad and I am very sad. Please fix this stuff.

[jagomez]

Is this where we post errors too? Didn't see a specific thread.

Either way, Hero IX MOBO, GTX 1080 TI ASUS and TRIDENT RGB RAM, still same issue since original aura version. Only detects GPU. No mobo or RAM. Did everything everyone always tells me to do... uninstall, reboot, aura cleaner, reboot, power down and unplug, install new aura, reboot, power down and unplug, reboot, run as admin on everything including the start up, AURA actually comes up, but only shows GPU.

Asus, I'm very sad you guys can't figure out software. Hire people that can please. This stuff could be so good. I hate AURA and am recommending many friends to stay away from ASUS because you can't fix sometime so basic and simple. I haven't had all 3 RBG sets working since the month I built my PC over a year ago. This is very sad and I am very sad. Please fix this stuff.

had the same issue.

i think what fixed mine was when i check the connection of my IO shield to my mobo. it was loose. when i plugged it back tightly had no issues what so ever to this day. I had the steps written somewhere in the previous aura sync version thread. you might wanna check it out.

[namoi]

Of course,

The subject is corrected in this way

What do you mean?

[Flint018]

Hello everyone,

The goal of this thread is to post new versions of AURA Sync and to discuss any errors you might encounter

Hi

Same problem exist, since last yr, aura sync stopped working when a mouse is in-sync. i got pugio and evolve both having the same problem. all my peripherals are aura sync but only my mouse is causing the crash.

[namoi]

Hi

Same problem exist, since last yr, aura sync stopped working when a mouse is in-sync. i got pugio and evolve both having the same problem. all my peripherals are aura sync but only my mouse is causing the crash.

Yes reported multiple time already and it is clearly related to the mouse. I have a Claymore, a 1060 Strix on an X99 Strix Gaming so I tested multiple combos and it crashes only IF the mouse is synced in Aura AND if the mouse is actually used. The time it takes is variable (from 5 to 30 minutes).

Nonetheless I narrowed it to the Rainbow effect. Well at least with Breathing and Color Cycle Aura doesn't hangs/freeze (i didn't tried the other modes though).

So to reproduce on a X99 Strix Gaming with a Claymore, a Gladius 2, a 1060 Strix and a populated rgb header with strips/fans (if that matters) on Windows 10 Enterprise.

- Sync the mouse in Aura
- Switch to Rainbow effect (i use gradient color 0 to 359 hue if that matters with the standard speed)
- Use the mouse for at least 5 to 30 minutes while doing stuff (browsing is enough)

[Flint018]

Yes reported multiple time already and it is clearly related to the mouse. I have a Claymore, a 1060 Strix on an X99 Strix Gaming so I tested multiple combos and it crashes only IF the mouse is synced in Aura AND if the mouse is actually used. The time it takes is variable (from 5 to 30 minutes).

Nonetheless I narrowed it to the Rainbow effect. Well at least with Breathing and Color Cycle Aura doesn't hangs/freeze (i didn't tried the other modes though).

So to reproduce on a X99 Strix Gaming with a Claymore, a Gladius 2, a 1060 Strix and a populated rgb header with strips/fans (if that matters) on Windows 10 Enterprise.

- Sync the mouse in Aura
- Switch to Rainbow effect (i use gradient color 0 to 359 hue if that matters with the standard speed)
- Use the mouse for at least 5 to 30 minutes while doing stuff (browsing is enough)

Yep exactly...

im building a new PC for my brother,,, and making it AORUS ones... not gonna suggest ASUS anymore...

[Cookie!]

Hi All,

I am having an issue that's stressing my brain out.

Hardeware:
Asus b250i rog strix
Various RGB components
Phantek Enthoo Evolve Case

The reason I mention the case is that it has its own RGB controller on the front panel for the power button and front panel LED. So it has its own RGB effects.
http://www.phanteks.com/Enthoo-Evolv...eredGlass.html

I tried to sync my motherboard and components to the cases RGB system. I did not realise you have to alter the Case's RGB controller to do this. You cant just plug in the motherboard to the case RGB as it conflicts.

SO ITS CONFLICTED

Now all my RGB components are showing incorrect colours. I have unplugged from the CASE RGB. My RGB used to work correctly before I plugged into case.
RED is showing as - Purple
GREEN is showing as - Teal/turqoise light blue
BLUE - Is showing correctly. Weird.

When I turn off the motherboards RGB system the Motherboards RGB turns off but all my components turn to blue. Cant turn them off.

It seems like the CASE controller has reconfigured the motherboards controller to show different colours instead of the proper colours as stated above.
I have tried calibrating the RGB header. Doesnt help.

ANY IDEAS?

[namoi]

Hi All,

I am having an issue that's stressing my brain out.

Hardeware:
Asus b250i rog strix
Various RGB components
Phantek Enthoo Evolve Case

The reason I mention the case is that it has its own RGB controller on the front panel for the power button and front panel LED. So it has its own RGB effects.
http://www.phanteks.com/Enthoo-Evolv...eredGlass.html

I tried to sync my motherboard and components to the cases RGB system. I did not realise you have to alter the Case's RGB controller to do this. You cant just plug in the motherboard to the case RGB as it conflicts.

SO ITS CONFLICTED

Now all my RGB components are showing incorrect colours. I have unplugged from the CASE RGB. My RGB used to work correctly before I plugged into case.
RED is showing as - Purple
GREEN is showing as - Teal/turqoise light blue
BLUE - Is showing correctly. Weird.

When I turn off the motherboards RGB system the Motherboards RGB turns off but all my components turn to blue. Cant turn them off.

It seems like the CASE controller has reconfigured the motherboards controller to show different colours instead of the proper colours as stated above.
I have tried calibrating the RGB header. Doesnt help.

ANY IDEAS?

You will need the Phanteks RGB Mobo adapter. Mandatory as the layout used by Phanteks are not standard hence the wrong color (don't try to calibrate it won't work with the controller on - with it off I am not sure though but better to use the adapter as it will correct the pins layout).

http://www.phanteks.com/PH-CB_RGB4P.html

Then follow to the letter the manual provided with the cable. Mostly you will need to disable the rgb controller by long pressing the rgb control button on the Phanteks control panel until the light turn off. You can then use that switch as a reset button with a cable extension (Dupont male connector will fit in the JST of that cable).
The rest is straightforward.

[Cookie!]

You will need the Phanteks RGB Mobo adapter. Mandatory as the layout used by Phanteks are not standard hence the wrong color (don't try to calibrate it won't work with the controller on - with it off I am not sure though but better to use the adapter as it will correct the pins layout).

http://www.phanteks.com/PH-CB_RGB4P.html

Then follow to the letter the manual provided with the cable. Mostly you will need to disable the rgb controller by long pressing the rgb control button on the Phanteks control panel until the light turn off. You can then use that switch as a reset button with a cable extension (Dupont male connector will fit in the JST of that cable).
The rest is straightforward.

Hi There, Thanks for your response.

I do have the phantek RGB adapter. That is what I had used to connect the motherboard to the pahntek case. However I did not long press the reset button which is probably the problem here.

Regardless my motherboard is no longer connected to the case at all and my RGB lighting is wonky. It used to work correctly.
My RGB components are made up of 3 LED strips , 2 fans and 1 CPU cooler block.
1 of the LED strips are a phantek LED strip and has the phantek connection, my CPU cooler block (deepcool captain ex240 RGB) also has the same phantek connector however the other components, 2 LED strips & 2 fans have a different connector (pins)

I managed to wire these all together using

(https://za.etzetra.com/products/1pc-...hoCdagQAvD_BwE)

Now there was some "jimmy" work, cutting of cables, manually connecting PINS to phantek connectors. I managed to work it out and get it all correct. The system was working great, all colours corresponded. The problem arose when I connected that working system to the case incorrectly...

Now, when I plug in even 1 RGB component to the motherboard, LED strip or fan, the colours are incorrect. Purple, teal, blue. Which means the motherboard is pushing out the wrong colours.......... Does not matter if I use the phantek LED adapter or the one that came with the motherboard.


NOTE: When I recieved this case the default colour on the LED on the front of the case was a light pink. When my system was connected to it, it turned my system light pink. Now my system will NOT go red or green or blue properly.

Strange