Page 2 of 2 FirstFirst 1 2
Results 11 to 13 of 13
  1. #11
    ROG Enthusiast Array
    Join Date
    Dec 2017
    Reputation
    10
    Posts
    58

    BTW if I run a Prime Torture Test then the temps on 4 of my cores start climbing up to 90s while all the rest remain at max 90c. But under my daily usage I have not witnessed any workload like that no matter what I do.

    I also have intel Turbo Boost 3.0 enabled and HWiNfo64 reports clocks up to 4.855MHz for my two best cores and 4,545 for all the rest under stress testing even though I have restricted the multipliers in the BIOS.

  2. #12
    ROG Guru: Blue Belt Array Silent Scone's Avatar
    Join Date
    Mar 2016
    Reputation
    1
    Posts
    874

    HWINFO is reporting the clocks incorrectly. AIDA also has this problem on occasion. I wouldn't pay too much attention to it and see if it gets fixed in a future update.

  3. #13
    ROG Member Array Inkar PC Specs
    Inkar PC Specs
    MotherboardRampage VI Extreme
    ProcessorIntel i9-7940X
    Memory (part number)[Trident Z] F4-3200C14Q-64GTZ
    Graphics Card #1EVGA 1080Ti SC2 Black
    MonitorROG Swift PG279Q
    Storage #1Samsung 960 Pro 2Tb
    CPU CoolerEVGA CLC-280
    CaseCoolerMaster Cosmos C700P
    Power SupplyEVGA SuperNova 1200W P2
    OS Windows 10 Fall Creators Update

    Join Date
    Nov 2016
    Reputation
    10
    Posts
    17

    Quote Originally Posted by JustinThyme View Post
    Without having the entire picture my guess is there is some setting holding you back.
    Check the thread again and set only what you see there different from optimized values and leave the rest alone unitl you get where you want to be then only change one thing at a time. We all want to get there faster but often attempting too many things at once leaves us chasing out tails.
    That's what I did. I cleared the bios once more and did it again just to take some pictures for you. I try to keep everything as much as it is in the thread, but some things can't be exactly the same (example: I have 3200 memory, so that can't have the exact same settings).

    Just to make sure I'm doing everything right, to clear the bios i just shut down the computer and press the clear bios button in the back for 2-3 seconds. After that I get the "press F key button to enter the bios" etc message when I boot.

    Here are the pictures:

    First, when setting XMP I get this question. I answered yes.

    Click image for larger version. 

Name:	180523144358.jpg 
Views:	0 
Size:	100.8 KB 
ID:	73934


    Then I continued with the settings:


    Click image for larger version. 

Name:	180523145227.jpg 
Views:	0 
Size:	164.8 KB 
ID:	73935

    Click image for larger version. 

Name:	180523145250.jpg 
Views:	0 
Size:	150.0 KB 
ID:	73936

    Click image for larger version. 

Name:	180523145351.jpg 
Views:	0 
Size:	163.8 KB 
ID:	73937

    Click image for larger version. 

Name:	180523145428.jpg 
Views:	0 
Size:	157.1 KB 
ID:	73938

    Click image for larger version. 

Name:	180523145459.jpg 
Views:	0 
Size:	180.9 KB 
ID:	73939

    Click image for larger version. 

Name:	180523145542.jpg 
Views:	0 
Size:	166.1 KB 
ID:	73940

    Just to make sure everything in the bios is right, this is the info screen:

    Click image for larger version. 

Name:	180523151516.jpg 
Views:	0 
Size:	140.4 KB 
ID:	73941

    Now the results (I use cinebench to keep the processor busy):

    Click image for larger version. 

Name:	HWinfo-mesh.jpg 
Views:	0 
Size:	402.2 KB 
ID:	73942

    Click image for larger version. 

Name:	IXTU-core.jpg 
Views:	0 
Size:	405.2 KB 
ID:	73943

    As you can see, it is not working. To be honest, I don't know what else to do. Any ideas?
    Last edited by Inkar; Today at 02:23 PM.

Page 2 of 2 FirstFirst 1 2

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •