i have fixed my adaptive volts - spikes 100 % and have posted how and what i did or should i say discovered the work around
load line level 6
ia/dc load line =0.01
svid best case
cpu power limits maxed
now say you set adaptive to 1.3v when u play a game or ap pthat uses avx you will get a 0.036v spike or more 1.3v + 0.036 v = 1.36v or more . some times close to 1.4v
n ow u can lower load line calibration but it doesnt help what i have found that solved all my adaptive 5.0 ghz over clock volt spikes was to set a
- 1 avx offset
why ? do that cause when you use a avx offset of - 1 you only get a spike of 0.016 v vs 0.036 v + with out avx offset -1 1.3v + 0.016v spike = 1.316v
using load line level 6 that is
im currently @ 5.1 ghz with avx offset - 1 ( 5.0 ghz on avx loads ) @ 1.36v adaptive with power saving and c states enabled i get a max volt spike to 1.376v ( 0.016v spike )
witch i can live with thats with in normal i can sleep at night knowing adaptive mode is working fine .
test it out your self
🙂 hope this helps
Rig # 1 - 14900Ks SP-118 | 87 MC @ 6.0 GHZ | 5.2 R | 4.7 E | DDR5 48GB @ 8,600 c36 | Strix RTX 4090 | PG27AQN 1440P 27" 360 Hz G-Sync ULMB 2
Rig # 2 - 14900K-SP-120 | 89 MC @ 5.9 GHZ | 5.2 R | 4.7 E | DDR4 32GB @ 4,300 c15 | Strix RTX 3080 | Aoc 1080P 25" 240 Hz G-Sync