Page 170 of 185 FirstFirst ... 70 120 160 168 169 170 171 172 180 ... LastLast
Results 1,691 to 1,700 of 1844
  1. #1691
    New ROGer Array
    Join Date
    Mar 2019
    Reputation
    11
    Posts
    49

    Quote Originally Posted by SumTingWong View Post
    Has anyone ran into any problems on 1.0.0.4 bios for x470f?
    I haven't, but I am on a 3900x, with 3200 Mhz C14 RAM, everything for that worked fine, but I have been having boost issues since before that, I am only hitting 4.550 max on idle workloads and 4.357 on single-core, working it through some folks on here, it's probably something with me and a setting.

    I will say though my ALL core boosts are higher and more stable. Which is more important for my day to day.

    There is also a new chipset driver so make sure you download that.

  2. #1692
    New ROGer Array
    Join Date
    Oct 2019
    Reputation
    10
    Posts
    15

    Quote Originally Posted by schmak View Post
    I haven't, but I am on a 3900x, with 3200 Mhz C14 RAM, everything for that worked fine, but I have been having boost issues since before that, I am only hitting 4.550 max on idle workloads and 4.357 on single-core, working it through some folks on here, it's probably something with me and a setting.

    I will say though my ALL core boosts are higher and more stable. Which is more important for my day to day.

    There is also a new chipset driver so make sure you download that.
    Running the same 3900x, and the 3200C14 as well, but I have mine at 3600c16. I downloaded the new driver from AMD, and installed 5404. I have to say more sustained frequencies are more crushed than before... I was holding 4.1-4.075Ghz, now I'm dropping to 4.025 and less. Temps don't seem any better for the wear either.

    I tried to install the new chipset driver from AMD, and the PSP driver failed. Is there another place I should be getting the chipset driver?

  3. #1693
    New ROGer Array
    Join Date
    Mar 2019
    Reputation
    11
    Posts
    49

    Quote Originally Posted by Topfn View Post
    yeah, RM is reading crap - using Auto values, my VDDG was higher than Vsoc - which is impossible.

    schmak, have you considered going for 3600MHz with your RAM? B-dies?
    I didn't see where 3600 C16 has any real performance benefit over 3200 C14 so I haven't bothered. They are Samsung B Die.

  4. #1694
    New ROGer Array
    Join Date
    Mar 2019
    Reputation
    11
    Posts
    49

    FWIW I was able to get about another 100 Mhz booost on Single Core and Multicore by manually setting my PPT, TDC, and EDC to 395/114/168 which I believe are our board's specs. Temps are still the same, but on multithread I am seeing 100 more MHZ and on single 75-100. Still not hitting 4.6 though, getting closer.

  5. #1695
    New ROGer Array
    Join Date
    Aug 2019
    Reputation
    10
    Posts
    14

    So far this bios is a bust for me... cant believe this garbage.

    5220v
    single core-
    4.40-4.25ghz Boost
    Multi core-
    4.150-4.175ghz CB15/20
    4.325-4.375ghz gaming

    5406v
    single core-
    4.35-4.375ghz Boost
    Multi core-
    4.075-4.100ghz CB15/20
    4.275-4.30ghz gaming

    Will play around and try some different setting ut looks like I might just go back to old bios.
    @Topfn: Your profile worked but it seems to be the issue when it comes to my lower clocks. I defaulted setings and was able to get most of my clocks back... very odd. Guess back to waiting for mod bios
    Last edited by Mr. Sunshine; 11-27-2019 at 05:26 AM.

  6. #1696
    New ROGer Array
    Join Date
    Jul 2019
    Reputation
    10
    Posts
    53

    Cool

    Quote Originally Posted by Spook161 View Post
    I tried to install the new chipset driver from AMD, and the PSP driver failed.
    Let me guess - you removed some AMD drivers with DriverStoreExplorer, didn't you? Now you will get that error always.

  7. #1697
    New ROGer Array
    Join Date
    Jul 2019
    Reputation
    10
    Posts
    53

    Quote Originally Posted by Topfn View Post
    I can't share my mod bios, because it's personalized -> "filled" with my UUID, MAC, S/N
    What program did you use to add that info to BIOS?

    Quote Originally Posted by Topfn View Post
    not sure how my profile might be the reason for lower clocks. it's just SSC disabled.
    did you properly set your personal settings after loading my .CMO?
    Is it possible to remove everything from it and leave only 1 setting - Spread Spectrum [Enabled] -> [Disabled]?

  8. #1698
    New ROGer Array
    Join Date
    Jul 2019
    Reputation
    10
    Posts
    53

    Question

    Quote Originally Posted by Topfn View Post
    Edit: you're thinking that my 3700x optimized defaults differ from 3900x defaults?
    I've absolutely no idea. I mean, BIOS in itself is a weird thing, somehow some old settings may stick after updating it with default means, 1usmus talked about that and adviced to use a 3rd party tool that removes old BIOS completely before flashing new one. I don't know if it's true, but I'm pretty sure 1usmus knows enough about it.

    So I might imagine that your defaults might differ.

  9. #1699
    New ROGer Array
    Join Date
    Oct 2019
    Reputation
    10
    Posts
    1

    How can I edit a CMO file to disable SSC?
    The file posted here could not be loaded from my bios because my cpu is not supported.
    I have a 2600X.

  10. #1700
    New ROGer Array
    Join Date
    Mar 2019
    Reputation
    11
    Posts
    49

    Quote Originally Posted by Topfn View Post
    yeah, and sometimes a second flash + cmos reset can help as well.
    using flashrom will completely erase the previous bios. that's for sure.
    I take it then I shouldn't be using the EZ flash in the BIOS? When I did that last time it took seconds so I am thinking it is not completely overwriting Also where is the Clear CMOS jumper? The Manual doesn't say, it just says it's there. Looks different than the Clear RTC RAM or is that the same?

    I think your CMO file is fine for 3900x but I will test reflashing not using ezflash and then resetting CMOS to see if I can get mah speed back

    On a side note, thanks for all your help here. You sir (or ma'am), are a gentleman and a scholar!

Page 170 of 185 FirstFirst ... 70 120 160 168 169 170 171 172 180 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •