Page 26 of 167 FirstFirst ... 16 24 25 26 27 28 36 76 126 ... LastLast
Results 251 to 260 of 1664
  1. #251
    ROG Enthusiast Array
    Join Date
    Jul 2018
    Reputation
    11
    Posts
    44

    Quote Originally Posted by Sarronco View Post
    Yes, manual OC on the 2700x is pointless, you lose performance, and in my testing even with a 1,28 vcore at 4ghz you get almost the same temps as in auto.
    I might try that. At Auto settings it's feeding the CPU 1.4v for 4GHz, I'll try 1.3v.

  2. #252
    ROG Enthusiast Array
    Join Date
    Dec 2017
    Reputation
    10
    Posts
    29

    Dear friends, cam version 3.6.3 now able to save and launch settings after each boot up. However, the fan and pump speed not doing well with the curves and this is after setting them to tag to the cpu temp. Have sent a ticket to nzxt

    bios 4018 is still on agesa 1.0.0.2, didn't notice much changes here either

  3. #253
    ROG Enthusiast Array
    Join Date
    Jul 2018
    Reputation
    10
    Posts
    32

    I seem to be unable to adjust speed on pump 1(1A) when running AIO. Pump+(3A) header works fine. Anyone else noticed something similar?

  4. #254
    ROG Enthusiast Array
    Join Date
    Jul 2018
    Reputation
    11
    Posts
    44

    Quote Originally Posted by Leeta View Post
    I seem to be unable to adjust speed on pump 1(1A) when running AIO. Pump+(3A) header works fine. Anyone else noticed something similar?
    You using Kraken X62?

  5. #255
    ROG Enthusiast Array
    Join Date
    Jun 2018
    Reputation
    10
    Posts
    31

    Bios 4018

    Flashed the latest Bios Version, didn't really notice any difference. Same overclocking settings as on 4011 are working just fine.

    Click image for larger version. 

Name:	3466MHz.JPG 
Views:	5 
Size:	172.2 KB 
ID:	74800

    - G.Skill Flare X (2x8GB) 3200MHz overclocked to 3466MHz with 1.45v, auto soc v (which is 1.15) with the Stilts fast b-die timings for 3333MHz.

    - Ryzen 5 2600X overclocked to 4.2GHz 1.381v LLC Level 3 max temp under 100% load 70.3C on H115i 280mm AIO Watercooler fixed 1200rpm on Radiator Fans.


    I also gave performance enhancer lvl 3 another try on this BIOS with pbo enabled and scalar on auto. Single cores boosting to 4.25GHz with voltage peaks up to 1.55v. I just prefer the manual allcore overclocking for now since I do some heavy tasks on my PC.

    I haven't tested if the blackscreen issue is still there when I run HWInfo and Corsair Link at the same time, I'm used to closing Link by now when I want to use HWInfo to monitor stuff.

    I've had no issues overclocking my memory on Bios 4018 aswell as on Bios 4011 so the new one is kinda useless for me, anyway I always flash the latest version for the sake of it.
    Last edited by norman_87; 07-23-2018 at 07:12 AM. Reason: A Word

  6. #256
    ROG Enthusiast Array
    Join Date
    Jul 2018
    Reputation
    11
    Posts
    44

    Quote Originally Posted by norman_87 View Post
    Flashed the latest Bios Version, didn't really notice any difference. Same overclocking settings as on 4011 are working just fine.

    Click image for larger version. 

Name:	3466MHz.JPG 
Views:	5 
Size:	172.2 KB 
ID:	74800

    - G.Skill Flare X (2x8GB) 3200MHz overclocked to 3466MHz with 1.45v, auto soc v (which is 1.15) with the Stilts fast b-die timings for 3333MHz.

    - Ryzen 5 2600X overclocked to 4.2GHz 1.381v LLC Level 3 max temp under 100% load 70.3C on H115i 280mm AIO Watercooler fixed 1200rpm on Radiator Fans.


    I also gave performance enhancer lvl 3 another try on this BIOS with pbo enabled and scalar on auto. Single cores boosting to 4.25GHz with voltage peaks up to 1.55v. I just prefer the manual allcore overclocking for now since I do some heavy tasks on my PC.

    I haven't tested if the blackscreen issue is still there when I run HWInfo and Corsair Link at the same time, I'm used to closing Link by now when I want to use HWInfo to monitor stuff.

    I've had no issues overclocking my memory on Bios 4018 aswell as on Bios 4011 so the new one is kinda useless for me, anyway I always flash the latest version for the sake of it.
    I assume that's 1.381v under load with LLC 3?

  7. #257
    ROG Enthusiast Array
    Join Date
    Jun 2018
    Reputation
    10
    Posts
    31

    Quote Originally Posted by dfg555 View Post
    I assume that's 1.381v under load with LLC 3?
    That's the voltage needed for my overclock to be stable, LLC LVL 3 vdroops voltage under full load to ~1.35v.

    Fixed manual voltage since I manually overclocked. Also windows balanced power plan to have cores boosting down while in idle.

    I don't really get your question but whatever.
    Last edited by norman_87; 07-23-2018 at 01:58 PM.

  8. #258
    ROG Junior Member Array
    Join Date
    Aug 2013
    Reputation
    10
    Posts
    2

    Just wondering how do you guys get non ryzen QVL ram working? I currently am using a 2700x with the asus strix x470 bios 4018 and my ram is 4x4gb dd4 3000mhz GSKIL F4-3000C15Q-16GVRB with the timings being CL15-16-16-35 1.35V. My problem with just using the profile is that when i am using computer sometimes i would get a 10 second freeze and things will be back to normal. I am not sure why i am getting this but playing the ram setting sorta mitigates it a bit but overall still kinda of random. I have a 750w gold plus power supply so i know its not the powersupply as the only other thing that would use alot of power would be my gpu which is a radeon rx580 8gb. Is there a special way to manual enter timing or do i need new ram? I did use the typhoon program and it shows my ram as being Samung E-Die. My current setting has been auto for everything except the profile for d.c.o.p profile. Hoping for some guidance to get the system more stable.

  9. #259
    ROG Enthusiast Array
    Join Date
    Jun 2018
    Reputation
    10
    Posts
    31

    Quote Originally Posted by superspeed View Post
    Just wondering how do you guys get non ryzen QVL ram working? I currently am using a 2700x with the asus strix x470 bios 4018 and my ram is 4x4gb dd4 3000mhz GSKIL F4-3000C15Q-16GVRB with the timings being CL15-16-16-35 1.35V. My problem with just using the profile is that when i am using computer sometimes i would get a 10 second freeze and things will be back to normal. I am not sure why i am getting this but playing the ram setting sorta mitigates it a bit but overall still kinda of random. I have a 750w gold plus power supply so i know its not the powersupply as the only other thing that would use alot of power would be my gpu which is a radeon rx580 8gb. Is there a special way to manual enter timing or do i need new ram? I did use the typhoon program and it shows my ram as being Samung E-Die. My current setting has been auto for everything except the profile for d.c.o.p profile. Hoping for some guidance to get the system more stable.
    Probably due to not running dual channel and having 4 dims. Not an expert I recommend heading over to overclocking discord and ask all of this in #ram-overclocking channel great community over there.

    https://discord.gg/overclock

  10. #260
    ROG Enthusiast Array
    Join Date
    Jul 2018
    Reputation
    10
    Posts
    32

    Quote Originally Posted by dfg555 View Post
    You using Kraken X62?
    No I am using a cooler master master liquid that is supposed to work out of box on motherboard pins.

    By the way, does anyone know the purpose of VDDCR CPU Capability? It does not seem to improve stability to me and only raises VDDCR CPU voltage which apparantly can cause damage over time if it gets to ~1.45v. Using LLC seems to work fantastic where lvl4 lowers vdroop to 0.0125v-0.01275v with a ridiculously low spread. When idling it barely spikes SVI2 cpu voltage over default set voltage. Static 1.3625v on idle spikes at most to ~1.3635. I haven't tested LLC5 because LLC4 is super predictable and allows me to finetune voltages.

    Never seen a motherboard with such a high control over vdroop and DOES NOT SPIKE IDLE VCORE.
    Last edited by Leeta; 07-23-2018 at 09:21 PM.

Page 26 of 167 FirstFirst ... 16 24 25 26 27 28 36 76 126 ... LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •