Hi, I have the ROG RAMPAGE VI APEX motherboard paired with an i9 7900x.

Addon cards installed include:
One GPU x16 slot
One 10gbit card x8 slot
One Asus Hyper M.2 card x16 used for data storage (none boot) filled with 960 Evo's

How do I go about configuring two 960 Evo's for RAID 0 bootable for OS installation?

1. Do I use DIMM.2 on the left-hand side of the board or do I use the DIMM.2 on the right-hand side of the board next to the 24 pin PSU connector cable.
2. How do I set this up in the bios
3. Is it possible to clone my current Windows installation from a SATA SSD to the M.2 and how?

Thanks in advance