Lighting_Control_1.06.17 - bug

[NeoPlex]

Hello,

I discovered one bug about this SW. It is about "Shut down" settings. After restart is set to default (maybe to same as in tab "synchronized" settings)

UC:
1) in Aura SW click on TAB "Shut down"
2) set option "off"
3) turn off PC - everything is OK - MB leds are off (for now)
4) turn on PC and without touching into Aura SW turn PC off again
5) MB leds are ON - NOK -> bug

every time if I wanted leds OFF on MB when PC is turned off, then I had to go into to aura settings and set again "ÖFF" in shutdown menu (And i mean every time before PC was turned off). It is very annoying.

Configuration
MB: ROG STRIX B350-F GAMING
CPU: AMD Ryzen 5 1600
VGA: ROG STRIX GTX 1070
RAM: Corsair Vengeance RGB LED 16GB (2x8GB)
OS: Win 10 home - 64bit

[NeoPlex]

thanks.. ill try it

[m4ttjirm]

You sir are extremely knowledgeable. By any chance do you have any ideas in regards to the two posts that I started? Thank you.

Hi,

This is not a bug, it is just that what is configured on AURA (Windows) is must also configured on the BIOS UEFI.

You just have to configure it on the BIOS EUFI :

BIOS UEFI > Advanced Mode > Advanced tab > Onboard Devices Configuration :

Attachment 74338

RGB LED Lighting : On
In Sleep, Hibernate & Soft Off States : Off