07-11-2018 06:41 AM - last edited 3 weeks ago by ROGBot
07-11-2018 07:19 AM
07-11-2018 07:48 AM
DirtyMacho wrote:
what is oc setting. Share the bios snapshot. Only then we can understand what is wrong. Also share the snap of the corsair monitor for cooler . Link software i mean. we need to know the liquid temps
Is this max is on load and did u try any strest test and it hits that max or durning normal cold boot
07-11-2018 07:24 AM
07-11-2018 07:49 AM
runningdodo wrote:
I´m shure, that this behavior isn´t the mainboard´s falut.
Perhaps you´ve just forgotten to remove the protection foil of the coolerplate or you made a mistake with mounting ist.
07-11-2018 09:07 AM
07-11-2018 09:23 AM
Phillyflyer wrote:
8086k should only require 1.31v to achieve 5.0ghz all cores at stock....my suggestion is to set the XMP...set VCore to auto...set LLC to auto instead of level 6....change AVX from 3 to 0....run P95 version 26.6 which has no AVX ...try that first and see where the voltages and temps land.
07-11-2018 12:28 PM
07-11-2018 01:01 PM
Phillyflyer wrote:
Something definitely not right...just throwing this out there...but...are your fans on the cooler in the correct direction ??...2 chips and 2 coolers giving the same results kinda tells me that the fans are not in the correct direction for air flow or...there is an issue with that board.
07-11-2018 03:32 PM