Results 1 to 10 of 95

Threaded View

  1. #11
    untouched Array Praz's Avatar
    Join Date
    Apr 2011


    As Raja has stated some of this observed behavior is inherent to the architecture. Most of this can be dialed out assuming one has the necessary equipment and knowledge of the platform. Actual voltages and response times need to be monitored while making changes. As you have only posted screenshots of software monitoring utilities I'm assuming you lack the necessary tools to make these measurements. Complaing above that
    Setting additional turbo ratio to 1.000V doesn't makes any difference AT ALL!
    demonstrates that even a basic knowledge of this platform is missing. Setting 1.0V is not a valid setting so there should be no observed difference. Sems the best course of action at this time would be for you to use manual mode and tune your clocks accordingly. Although I'm sure you will probably view this replay the same as you have classified the rest of this thread in a post at another forum.
    nothing but mumbling and irrelevant info

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts