Maximus X Hero (Wi-Fi) and Samsung 860 Pro forced disconnects

**Saltgrass** · 07-30-2018 07:21 PM

I run a Samsung 970 Pro in the second M.2 slot. I am trying to run a Samsung 860 Pro 1TB on a SATA port. It seems quite often the Intel Rapid Storage "Removes" the 2.5 inch SSD and I get a message regarding the situation.

It seems to work OK some of the time but disconnects far too often for the situation to be acceptable. I ran an 850 Pro on the same SATA connector and it was never disconnected. I read the Samsung Magician software may be at fault so I uninstalled it without any noticeable change.

I have the M.2 slot set to x4 and I am not using the first M.2 slot so the SATA ports I am using should not be effected by the M.2 slots.

The Event Viewer is showing an EventID 129 iaStorAC "Reset to device, \Device\RaidPort0, was issued". Link State Power Management is set to OFF in Windows but I need to check what the Bios shows. Once the drive has been disconnected, it seems to stay that way, even during reboots.

As far as I know, the Bios and all drivers are up to date and this happened prior to Bios 1602 and continues with it.

Thanks for reading...

**Saltgrass** · 09-01-2018 03:13 PM

It looks like no one else here is having the problem. But my situation continues. Since I have tried changing Ports and even disconnected my DVD drive, I don't know of anything else I can do except maybe try a Samsung community..

I am getting this message and it occurred four times in succession prior to the drive being disconnected.

EventID 51 An error was detected on device \Device\Harddisk0\DR0 during a paging operation.

Thanks for reading.

**Snakeyes** · 09-01-2018 04:00 PM

Any reason why you are not using the first M2 slot set to PCIE?

If there is no particular reason I would put the 960 in the first M2 slot and set it to PCIE. I would then connect the other Samsung SSD to the first or third Sata slot.
If you are determined to keep the 960 Pro on Sata, connect the other Samsung SSD to the third Sata slot.

**chevell65** · 09-01-2018 05:34 PM

Maybe this will help to solve the issue. https://blogs.technet.microsoft.com/...t0-was-issued/

Saltgrass PC Specs
Motherboard	Maximus X11 Hero (Wi-Fi)
Processor	i9 10900K
Graphics Card #1	EVGA RTX 3090 FTW
Sound Card	On Board
Monitor	Dell AW3420DW
Storage #1	Samsung 970 EVO Plus 2 TB
Storage #2	Samsung 860 Pro 1 TB
CPU Cooler	Cooler Master Hyper 212X
Case	Cooler Master
Power Supply	Antec HCP Platinum 1000
Keyboard	ASUS Strix Flare
Mouse	ASUS Chakram
Headset/Speakers	Logitech wired 5.1
OS	Win 10 Pro
Network Router	ROG Rapture GT-AX11000
Accessory #1	VR Headset
Accessory #2	Saitek X53

Saltgrass PC Specs
Motherboard	Maximus X11 Hero (Wi-Fi)
Processor	i9 10900K
Graphics Card #1	EVGA RTX 3090 FTW
Sound Card	On Board
Monitor	Dell AW3420DW
Storage #1	Samsung 970 EVO Plus 2 TB
Storage #2	Samsung 860 Pro 1 TB
CPU Cooler	Cooler Master Hyper 212X
Case	Cooler Master
Power Supply	Antec HCP Platinum 1000
Keyboard	ASUS Strix Flare
Mouse	ASUS Chakram
Headset/Speakers	Logitech wired 5.1
OS	Win 10 Pro
Network Router	ROG Rapture GT-AX11000
Accessory #1	VR Headset
Accessory #2	Saitek X53

chevell65 PC Specs
Motherboard	ROG Strix Z370-H, ROG Maximus VII Z97
Processor	Intel 4790K 4.6GHz, Intel i5 8400, Intel e8600 Wolfdale, Intel Q9650 Yorkfield, Intel E6750 Conroe
Memory (part number)	16GB G.Skill PC3600
Graphics Card #1	GTX 660 OC
Monitor	Asus 23"
Case	Corsair clear case
Power Supply	Thermaltake
Keyboard	Logitech G15
Mouse	Logitech G9
OS	Windows 10 Pro
Network Router	DLink DIR-655, Asus AC88

Thread: Maximus X Hero (Wi-Fi) and Samsung 860 Pro forced disconnects

Thread Tools

Search Thread

Display

Maximus X Hero (Wi-Fi) and Samsung 860 Pro forced disconnects

Posting Permissions