Results 1 to 3 of 3
  1. #1
    ROG Member Array
    Join Date
    Sep 2014
    Reputation
    10
    Posts
    17

    1602 bios and Bluetooth ?

    After updating the X FORMULA bios to 1602
    on reboot was given this information.

    Detected ATA/ATAPI devices

    Sata Port5 WDC xxxxxxx
    Sata Port6 WDC xxxxxxx
    ( my two Disk drives)

    A m.2 PCIe device ha been detected in the M.2_2 Socket .
    PCIe bandwidth on the socket can be set to x2 or x4.

    To improve performance switch from x2 to x4
    ..................................

    Well after reading that I pushed F1 and set the M2 to x4 and lost access to the two hard drives, removed from windows. lol
    The rest of the information on the screen Optane memory or the Raid configuration was confusing.

    But it did say Sata mode selection must be changed to raid mode to avoid unknown issues ..ah!

    I have set the settings back to X2 and the sata drives are showing up again in windows
    I have two M2 SSD and two Disk drives.


    Can someone walk me though this as I lost in the woods when looking in the bios.


    Bluetooth drama:
    My Bluetooth is Red X out. in Network configuration (win10) saying it's disconnected
    Anyone have a clue as to why, Ive download Bluetooth file the Asus / ROG- site for my board and reinstalled
    and in device manger its showing it's there.. but nothing is working. Can't get the PC to connected to any other Bluetooth or vice versa

    thanks

  2. #2
    ROG Guru: Orange Belt Array chevell65 PC Specs
    chevell65 PC Specs
    MotherboardROG Strix Z370-H, ROG Maximus VII Z97
    ProcessorIntel 4790K 4.6GHz, Intel i5 8400, Intel e8600 Wolfdale, Intel Q9650 Yorkfield, Intel E6750 Conroe
    Memory (part number)16GB G.Skill PC3600
    Graphics Card #1GTX 660 OC
    MonitorAsus 23"
    CaseCorsair clear case
    Power SupplyThermaltake
    Keyboard Logitech G15
    Mouse Logitech G9
    OS Windows 10 Pro
    Network RouterDLink DIR-655, Asus AC88
    chevell65's Avatar
    Join Date
    Oct 2014
    Reputation
    56
    Posts
    367

    Not sure about the Bluetooth issue but in X4 mode using M.2_2 you are sharing band width with the SATA 5&6 ports which is why you can't use X4.

    If you move those drives to SATA ports 3&4 you should be able to run in X4 mode.

    I believe the Bluetooth issue has to do with the Windows 10 creators update and driver compatibility issues.
    Last edited by chevell65; 08-04-2018 at 04:03 PM.

  3. #3
    ROG Member Array
    Join Date
    Sep 2014
    Reputation
    10
    Posts
    17

    Thanks

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •