08-05-2018 03:09 AM - last edited on 03-06-2024 08:58 PM by ROGBot
08-05-2018 04:36 AM
montyro wrote:
Hi, i recently built a computer and while it works pretty well ive found 2 different problems with it.
1.- Sometimes at boot it won't past through Asus ROG screen. With 3 different Q-Codes, 9C, A0, and b4 (or64?¿?) last one its the one that appears the most.
2.- Sometimes, while playing or watching youtube i get a small hang with distorted audio (around 1-2 seconds long), and after it happens, every time i open CPU-Z or HWMonitor it hangs (on CPUZ it hangs on PCI). I've tried a lot of things, but i can't get what's causing it. I can't even reproduce the hangs in order to do proper testing. Things i've tried:
- 3 Different nvidia drivers versions.
*- Tried both with XMP on and off.
- Updated Bios to 0804 from 0402.
- Passed Memtest for 3 hours without any problem, and another memory tester from inside windows for another 2 hours, no problems detected.
- Chskdsk gives no errors on any of the disks
- Uninstalled chipset drivers.
- sfc /scannow found no errors.
- Disabled VSS service. This was curious, as when i disabled it after an error *and opened cpu-z the hang did not occur (and it always occurs after i get a random hang, until i restart)
*- Disabled super fetch. Didn't actually get a screen hang (at least not while i was using the computer) but cpu-z still crashed.*
I can't narrow it to what it could be. Before i disabled superfetch there were some ESENT events with code 916, now it seems like those errors are not there anymore but i get nvidia drivers crashes.
Man im so happy with the performance of this computer but im thinking about returning it all as a whole and getting a 8700k. So much headaches....
*Thank you in advance!
08-05-2018 05:18 AM
syldon wrote:Q-Codes, 9C, A0, and b4 point to things that rely on the SOC. This could be voltages or bad memory setup. No one can really point you in any direction though without specs and a bios dump.
You can drop a text dump of all your bios settings with the bios menu under tools and then profiles. Add a copy of the stilts timing checker also would help
01-05-2019 10:11 AM
01-05-2019 11:00 AM
garrywoodley52 wrote:
hi Just built this today
Asus Rog c7h
Corsair vengeance c15 3000 (on the list)
ryzen 2700x
Nvidia gtx 1030
samsung 970 evo new clean
It will not boot to bios no image on screen just stops at OD on q code. I have tried the ram in different slots, one slot only etc any one any ideas pleas
01-06-2019 12:31 AM
01-07-2019 12:57 AM
01-07-2019 04:49 PM
gupsterg wrote:
Had mine since launch, really can't agree with that.
01-08-2019 11:50 PM
Prydeless wrote:
Don't get me wrong, I love the board, so many options and tweeks in the bios, alas I see F9 pretty much daily with QVL Ram, still love her though, shes just tempermental sometimes. 😄
01-11-2019 11:05 PM