Hey guys i figured it out, so if u have your OS on a NVME install the intel optane stick into the other m.2 slot then install the lastest intel RTS software, dont need the optane software, go into the bios boot options make sure your sata mode is set to intel RST and the m.2 slot your optane drive is located set to enable port remapping, then go to boot options -> CSM then on "boot from storage devices" change to "UEFI driver first" this will make the intel optane tab show up on the RTS Software. After u go back into windows go to disk managment and initialize the optane disk, make sure ur secondary disk is in GPT and just enable optane on the RTS software and choose the HDD you want to boost.