Ok thank you, you're creeping up on 3200MHz.
Try resetting to defaults once again and setting the ram manually, don't enable X.M.P.
Reset to defaults
1) Set the AI Overclock Tuner to Manual
2) Select Dram frequency - 3200MHz
3) Dram voltage - Enter in 1.35v
4) Set CPU VCCIO voltage to 1.20v
5) Set CPU System Agent voltage to 1.20v
6) Go to Dram Timing Control - At the very top, enter the primary timings like so...
16
18
18
38
Command Rate 2
F10 and enter to save and exit. If it doesn't want to go, bump up Dram voltage to 1.40v.
Does this get you to 3200MHz?