08-29-2018 06:14 AM - last edited on 03-05-2024 12:24 AM by ROGBot
10-30-2018 03:37 PM
J The DIYer wrote:
Working on a new computer build (last build was done over 10 years ago) where I am using a Asus ROG Strix X470-F for the motherboard and G.Skill TridentZ RGB DDR4 3600 for the memory. Before purchasing the mobo I had misread the specs of it and thought it said that it could handle 3600 memory by default so I was confused after get everything put together and powered on to find that the mobo was auto detecting the memory at 2133 instead of 3600. After re-reading the specs I now see that it says 3600o.c. (see below screen shot) which I am taking as it will handle the 3600 if I over clock the system? In the mobo bios under AI Tweaker tab there is an option to change the memory speed from automatic to a number of different options. If I change the speed to 3600 is this considering over clocking and will it break anything? Any help you can provide is greatly appreciated.
10-31-2018 03:12 AM
10-31-2018 03:30 AM
J The DIYer wrote:
is this considering over clocking and will it break anything?
07-07-2023 10:42 AM
Hi, i just instaled new ram kingston fury renegade 2x16 gb cl16 3600mt/s and i wont boot up with docp on 3600 cl16 profile 1, profile 2 is 3000cl15 and it works, tryd seting only 3600 oc without docp nothing wont boot, it does boot on 3200. ryzen5800x strix x470-f gaming ,strix 2070super,corsair rm850x 2 nvme-s 1 on pce i card, 2hdd, 1ssd, aio, 6 fans. I updated the bios, reseted cpu and battery, no luck. i runig it now with docp on 3600 but manualy set it on 3200
07-07-2023 10:43 AM
i runig it now with docp on 3600 but manualy set it on 3200
07-07-2023 01:22 PM
I put DDR4-3600 in Dual channel slots (A2-B2) and it was solved instantly.