Help
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 

New Rampage VI Extreme Bios 1503

Brockmonster
Level 8

‎09-07-2018 11:41 PM - last edited on ‎03-06-2024 08:08 PM by Community Admin

New bios 1503 is out has anybody checked it out ?
Phanteks Enthoo Elite, Asus Rampage VI Extreme Encore, Intel I9 10980XE, G.SKILL F4-3200C14Q-32GTZ Trident Z Series @3200, 2 x EVGA Hydro Copper GTX 2080TI, Creative Sound Blaster ZxR PCI-Express Sound Card, EK ASUS ROG R6EE RGB Monoblock, 2 x Samsung 970 Pro 512GB Direct to CPU, Aqua Computer kryoM.2 with Samsung 960 Pro 512GB PCIe slot 4, 4 x Corsair XTI 480GB SSD, Aqua Computer Aquaero 6XT, 2x Aqua Computer D5 NEXT pump with Aquabus interface, 2 x XSPC 480mm Rads, EVGA 1600w PSU and more
0 Kudos
4,597 Views
12 REPLIES 12

neurostudio
Level 7

‎09-08-2018 05:25 AM

Testing it. So far all good!
0 Kudos

Brockmonster
Level 8
In response to neurostudio

‎09-08-2018 11:27 AM

neurostudio wrote:
Testing it. So far all good!


The ME Version is different in 1503 yet on the download page it said
ROG RAMPAGE VI EXTREME BIOS 1503
Improve system stability and performance.
Update ME firmware to version 11.11.55.1509.
Fixed an issue that affected the boot device menu when two OS’s were installed on the same drive.

Defiantly not 11.11.55.1509 from what I seen so I used the update tool from the previous update and all seems stable so far.

Not overclocked yet but I will report back after testing
Phanteks Enthoo Elite, Asus Rampage VI Extreme Encore, Intel I9 10980XE, G.SKILL F4-3200C14Q-32GTZ Trident Z Series @3200, 2 x EVGA Hydro Copper GTX 2080TI, Creative Sound Blaster ZxR PCI-Express Sound Card, EK ASUS ROG R6EE RGB Monoblock, 2 x Samsung 970 Pro 512GB Direct to CPU, Aqua Computer kryoM.2 with Samsung 960 Pro 512GB PCIe slot 4, 4 x Corsair XTI 480GB SSD, Aqua Computer Aquaero 6XT, 2x Aqua Computer D5 NEXT pump with Aquabus interface, 2 x XSPC 480mm Rads, EVGA 1600w PSU and more
0 Kudos

MAD_EYE_GRIZ
Level 7

‎09-09-2018 11:36 AM

Can i ask a question I tried to update the ME driver but it just wont update but it says to do this before updating to the 1503 BIOS. any help would be appriciated
0 Kudos

Brockmonster
Level 8

‎09-09-2018 01:16 PM

You can download the ME tool which is the update before Bios 1503 on the download page. Just download it to your desktop and unpack it , run the tool and restart your pc when its completed. Then flash bios to 1503. It was a different fw number in bios when I flashed to 1503 so I just ran the tool again and all good. You should see the new fw version in bios under the main tab … the driver is in with the tool Or are you saying the tool fails ??
Phanteks Enthoo Elite, Asus Rampage VI Extreme Encore, Intel I9 10980XE, G.SKILL F4-3200C14Q-32GTZ Trident Z Series @3200, 2 x EVGA Hydro Copper GTX 2080TI, Creative Sound Blaster ZxR PCI-Express Sound Card, EK ASUS ROG R6EE RGB Monoblock, 2 x Samsung 970 Pro 512GB Direct to CPU, Aqua Computer kryoM.2 with Samsung 960 Pro 512GB PCIe slot 4, 4 x Corsair XTI 480GB SSD, Aqua Computer Aquaero 6XT, 2x Aqua Computer D5 NEXT pump with Aquabus interface, 2 x XSPC 480mm Rads, EVGA 1600w PSU and more
0 Kudos

MAD_EYE_GRIZ
Level 7

‎09-09-2018 01:52 PM

The tool fails and says you already have the up to date driver but when I look at the numbers to signify the different versions they are totally different. If it helps would you like me to update a photo to show you the dialogue box I get when I run the tool. The Box says ' Warning ' Please check MEI driver is installed '

when i check the driver version within windows for the ME it says 11.7.0.10577567075671
when im in the BIOS and its says ME version it says 11.10.0.1287

now im really confused.

P.S if i update the BIOS do i lose my RAID i created???75669
0 Kudos

tistou77
Level 13
In response to MAD_EYE_GRIZ

‎09-14-2018 02:06 AM

MAD EYE GRIZ wrote:
The tool fails and says you already have the up to date driver but when I look at the numbers to signify the different versions they are totally different. If it helps would you like me to update a photo to show you the dialogue box I get when I run the tool. The Box says ' Warning ' Please check MEI driver is installed '

when i check the driver version within windows for the ME it says 11.7.0.10577567075671
when im in the BIOS and its says ME version it says 11.10.0.1287

now im really confused.

P.S if i update the BIOS do i lose my RAID i created???75669

You confuse the MEI driver (under Windows) and the ME firmware (bios) 😉
Sorry for my english 😄


Case: Lian Li A77F
MB: Rampage VI Extreme Encore
CPU: i9 10980XE
RAM: G.Skill Trident Z RGB Royal 4x8Gb @4000 C16
GPU: EVGA RTX 2080ti XC Ultra
PSU: Seasonic Prime Ultra Titanium 1000W
OS: Intel Optane 905P PCIe
DATA: Samsung 980 Pro
SOUND: Asus Xonar Phoebus
0 Kudos

Brockmonster
Level 8

‎09-09-2018 11:13 PM

No you don't but bios will be at default settings so your PCH will be in AHCI mode. Change it back to raid and the array you created should be visible and all will be back to normal

Reference your first pic, my device manager shows the same
Phanteks Enthoo Elite, Asus Rampage VI Extreme Encore, Intel I9 10980XE, G.SKILL F4-3200C14Q-32GTZ Trident Z Series @3200, 2 x EVGA Hydro Copper GTX 2080TI, Creative Sound Blaster ZxR PCI-Express Sound Card, EK ASUS ROG R6EE RGB Monoblock, 2 x Samsung 970 Pro 512GB Direct to CPU, Aqua Computer kryoM.2 with Samsung 960 Pro 512GB PCIe slot 4, 4 x Corsair XTI 480GB SSD, Aqua Computer Aquaero 6XT, 2x Aqua Computer D5 NEXT pump with Aquabus interface, 2 x XSPC 480mm Rads, EVGA 1600w PSU and more
0 Kudos

MAD_EYE_GRIZ
Level 7
In response to Brockmonster

‎09-10-2018 05:14 AM

Brockmonster wrote:
No you don't but bios will be at default settings so your PCH will be in AHCI mode. Change it back to raid and the array you created should be visible and all will be back to normal

Reference your first pic, my device manager shows the same


Thank you for your help with this. Do you think im best of waiting then for the ME update to be included within a BIOS update then cause i have tried today again and still the same problem. Bit annoying really as i wont be able to update my BIOS cause of this.
0 Kudos

Brockmonster
Level 8
In response to MAD_EYE_GRIZ

‎09-10-2018 11:30 PM

MAD EYE GRIZ wrote:
Thank you for your help with this. Do you think im best of waiting then for the ME update to be included within a BIOS update then cause i have tried today again and still the same problem. Bit annoying really as i wont be able to update my BIOS cause of this.


Have you tried switching to bios 2 then try the update tool. You can try downloading it again and after unpacking it check out the property tab and make sure the unblock box is ticked and also run it as admin. If t does not update then flash bios with 1503 first and then try the tool. Also how are you updating bios
Phanteks Enthoo Elite, Asus Rampage VI Extreme Encore, Intel I9 10980XE, G.SKILL F4-3200C14Q-32GTZ Trident Z Series @3200, 2 x EVGA Hydro Copper GTX 2080TI, Creative Sound Blaster ZxR PCI-Express Sound Card, EK ASUS ROG R6EE RGB Monoblock, 2 x Samsung 970 Pro 512GB Direct to CPU, Aqua Computer kryoM.2 with Samsung 960 Pro 512GB PCIe slot 4, 4 x Corsair XTI 480GB SSD, Aqua Computer Aquaero 6XT, 2x Aqua Computer D5 NEXT pump with Aquabus interface, 2 x XSPC 480mm Rads, EVGA 1600w PSU and more
0 Kudos