AURA SYNC 1.06.95 - Report Issues Here

[MasterC@ROG]

To better understand which issues you are currently experiencing, I will be collecting your feedback for 2 weeks to let the team know. Please provide feedback before Sept. 25, thanks!

If you are not on the latest version, update to 1.06.95 to make debugging faster, please remember to mention:
1. The BIOS/firmware version for your hardware.
2. The AURA SYNC products you own and any other 3rd-party lighting software.
3. If a power cycle has made any difference. (Shutdown, power off, unplug power cable for a minute)
4. If you have reinstalled Aura or Windows.
5. If the issue was present in the previous versions(s)?

Download 1.06.95 here:
https://dlcdnets.asus.com/pub/ASUS/m...221.1511925089

[Ashwind]

M9 formula
strix 1080ti
led strip daisy chained to a ram cooler

The biggest issue I have at the moment is that every time my pc boots the gpu led reset to default colour and light cycle, also every week or so if I try to set the gpu to colour/cycle that is not default then aura doesn't show my motherboard.
I do not use any 3rd party lighting software this pot of crap is all aura's doing

[MasterC@ROG]

M9 formula
strix 1080ti
led strip daisy chained to a ram cooler

The biggest issue I have at the moment is that every time my pc boots the gpu led reset to default colour and light cycle, also every week or so if I try to set the gpu to colour/cycle that is not default then aura doesn't show my motherboard.
I do not use any 3rd party lighting software this pot of crap is all aura's doing

Can you check if power cycling resolves the issue?
Do you remember if the issue started after a Windows update?

[kitonium]

I have 2x Corsair Vengeance PRO RGB RAM, but the motherboard (Z370-F) with AURA Sync 1.06.95 does not detect the RAM. The RAM is able to light up (displaying uncontrolled RGB lighting).


My other problem with this software is that, once in a while, the RGB fans and strip (both from Cooler Master) will not light up from cold boot. I will need to enter the Aura Sync software to off, then on it again.

[jonathasMalta]

To better understand which issues you are currently experiencing, I will be collecting your feedback to let the team know. Thanks!
If you are not on the latest version, update to 1.06.95 to make debugging faster, please remember to mention the AURA SYNC products you own and any other 3rd-party lighting software.

Download 1.06.95 here:
https://dlcdnets.asus.com/pub/ASUS/m...221.1511925089

Eu tenho uma strix b250f gaming e no entanto ja faz algumas semanas que o aura sync vem dando problemas (não conecta mais com o rgb do pente de ram que é uma MEMORIA TEAM GROUP T-FORCE DELTA 8GB (1X8) 2400MHZ DDR4 PRETA RGB, TF3D48G2400HC15B01, assim ela fica com leds em um ciclo só sem poder controlar! Oque eu faço pra resolver isso?

[MasterC@ROG]

Eu tenho uma strix b250f gaming e no entanto ja faz algumas semanas que o aura sync vem dando problemas (não conecta mais com o rgb do pente de ram que é uma MEMORIA TEAM GROUP T-FORCE DELTA 8GB (1X8) 2400MHZ DDR4 PRETA RGB, TF3D48G2400HC15B01, assim ela fica com leds em um ciclo só sem poder controlar! Oque eu faço pra resolver isso?

Please use English in the forum if possible.
"I have a strix b250f gaming and however it has been a few weeks since the aura sync has been giving problems (no longer connects to the rgb of the ram comb which is a MEMORY TEAM GROUP T-FORCE DELTA 8GB (1X8) 2400MHZ DDR4 BLACK RGB, TF3D48G2400HC15B01, so it has leds in a cycle that just can not control! What do I do to solve this?"
Is the lighting on your memory module stuck on Color Cycle?
Is the lighting on the motherboard working as it should?
Have you tried shutting down and disconnecting the PC from the wall?

[MasterC@ROG]

I have 2x Corsair Vengeance PRO RGB RAM, but the motherboard (Z370-F) with AURA Sync 1.06.95 does not detect the RAM. The RAM is able to light up (displaying uncontrolled RGB lighting).

My other problem with this software is that, once in a while, the RGB fans and strip (both from Cooler Master) will not light up from cold boot. I will need to enter the Aura Sync software to off, then on it again.

Was the memory detected in previous versions of AURA?
Please let us know if other issues occur still exist in 1.06.95?

[rick66]

I`m not even able to make 1.06.95 run, it just crashes, i did a full uninstall of 1.06.17(which worked but buggy) and used aura cleaner before installing this latest version.

I`m also using 2 other programs. Corsair link for my RAM led, and Gigabyte Aorus for my GPU, My Case fans and waterblock are all Thermaltake RGB plus using the Thermaltake TT Sync Controller Premium, which is recommended by TT for Asus products. W10 64 Home.

[Ashwind]

Can you check if power cycling resolves the issue?
Do you remember if the issue started after a Windows update?

After reinstalling twice it does seem to be working (new releases seem to work for 3 or 4 days) but I had a simular issue as rick66 in the way the installer crashes or hangs on 100%, took me about ten attempts before it installed correctly, I did make sure the old version was uninstalled and rebooted before running the installer each time.

1 Bois version is 1301
2 Aura sync products are mobo, gtx1080 ti, phantects led strip and a corsair ram cooler with no other lighting software at all
3 Power cycle made no difference
4 yes performed 4 or 5 clean installations of version 1.06.95 (which eventually installed and works as it should)
5 yes the issue of GPU reverting to default colour was present in previous versions
6 Mobo is Maximus IX formula

[F0x135]

@Ashwind, make sure you 'unblock' the zip file first before unzipping it. Right click > unblock.

@MasterC@Asus, i did a clean install of this Aura version, even wiped out registry and ran Auracleaner. After install, the 'transition' between colors are slow and choppy, for example the ram RGB slides downwards, right now they're skipping instead of smooth.

I've seen this behaviour before, for example if i stress test the PC then the RGB behaves like this. Usually does it when there's high CPU usage.

But in this instance, the only thing running is windows. I've done 3 clean reinstalls now, and this behaviour is consistent.