cancel
Showing results for 
Search instead for 
Did you mean: 

ROG Rapture GT-AC5300 - Firmware 3.0.0.4.384.32799 [Report if any issues]

MasterC
Community Admin
Community Admin
New firmware (3.0.0.4.384.32799) was just released for the ROG Rapture GT-AC5300

Manual firmware update download here:
https://dlcdnets.asus.com/pub/ASUS/wireless/GT-AC5300/FW_GT_AC5300_300438432799.zip?_ga=2.155223090....

Please report in this thread if any issues, thanks!
_____________________________________________________________
FPS, Racing, and VR Gamer / Tech Enthusiast / ROG Admin
36,709 Views
122 REPLIES 122

belizejackie
Level 7
5ghz-2 still not working !! *

75876

belizejackie wrote:
5ghz-2 still not working !! *

75876


random reboots still happening here.
clients with issues to connect to WiFi still happening here.

belizejackie wrote:
5ghz-2 still not working !! *

75876


Have you tried changing the control channel?
75877
_____________________________________________________________
FPS, Racing, and VR Gamer / Tech Enthusiast / ROG Admin

MasterC@ASUS wrote:
Have you tried changing the control channel?
75877


The only channel works for me is 165 but it gives me 173.3mbps .. not getting the full speed ...

for me

- 5GHz-1 not working also in guest mode
done 3 times factory reset still same.
(1gbps fiber speed)

belizejackie wrote:
The only channel works for me is 165 but it gives me 173.3mbps .. not getting the full speed ...


Try setting the wireless mode to N/AC mixed. Pick a channel (say 157 for example) Try setting the bandwidth to 40mhz or 80mhz depending on distance to the router. On professional page, turn off roaming assistant. I'm getting a 350mbps connection on 5ghz-2 to a bridge in another building about 75ft away with those settings and bandwidth set to 80mhz.

chris k wrote:
Try setting the wireless mode to N/AC mixed. Pick a channel (say 157 for example) Try setting the bandwidth to 40mhz or 80mhz depending on distance to the router. On professional page, turn off roaming assistant. I'm getting a 350mbps connection on 5ghz-2 to a bridge in another building about 75ft away with those settings and bandwidth set to 80mhz.



same..tried all the channels and nothing ... I have been using Asus router since 66u 68u 87u ac5300 and this gt5300 is so stressful ... 😞
*75895
*

belizejackie wrote:
same..tried all the channels and nothing ... I have been using Asus router since 66u 68u 87u ac5300 and this gt5300 is so stressful ... 😞
*75895
*


In the screen shot, it looks like you still have the channel bandwidth set to 20/40/80. Try setting that to 80mhz. Did you "initialize" a factory reset after uploading the new firmware and then redo your settings?
I certainly agree with your last statement! The GT has been out a year and a half and it's still not ready for the market. My rt-ac5300 does pretty much everything better then the GT.

Administrator: *Could you please confirm if this is possible in this FW or not: *Under the VPN Fusion, can you set the VPN as the default connection and then set a device to only access the Internet under the Exception rules? *It seems to me that the opposite works but not this one. *Would appreciate your thoughts.
aka Marin in SNBForums