Page 2 of 2 FirstFirst 1 2
Results 11 to 13 of 13
  1. #11
    I'm having the same problem. And why not an official answer?

  2. #12
    ROG Guru: Gold Belt Array dstrakele's Avatar
    Join Date
    Sep 2011

    From what I've read in this forum, those that reported they resolved their USB 3.0 connectivity issues not only installed the latest Fresco Logic USB 3.0 driver, but also ran AsPatch.exe in the installation file set.

    Obviously, this didn't help everyone, as there are multiple causes, but I would be sure to do this first if experiencing this issue.
    G74SX-A1 - stock hardware - BIOS 202 - 2nd Monitor VISIO VF551XVT

  3. #13
    New ROGer Array
    Join Date
    Aug 2012

    USb 3.0 problem

    Quote Originally Posted by rachabot View Post
    I have this exact same issue with my G53SW. I have a WD Passport 1TB USB 3 hard disk (two of them actually). I can connect it to the blue USB 3 port and it opens fine, then just drops after a few minutes. Sometimes it stays connected for 5 minutes, 10 minutes, 30 seconds, totally intermittent. And like stated above, this same drive(s) plugged into any of the USB 2 ports, will stay connected for hours on end. Oh, and for further ammunition, these drives stay connected to the USB 3.0 ports on all my other systems. I hope there is a fix for this.
    I just purchased inpiron 5520 last night i got same problem. there are 4 usb 3.0 ports. 2 on left and 2 on right side. 2 ports on left side works well no problem there but 2 3.0 ports on right side ejects my 3.0 wd drive after a few seonds(15-30 seconds max)detects it again then eject again, this keeps on going(loop) also 2.0 drives works well with my right ports....i hope they fix it. i've been searching for a few hours now people are saying there problem with win7....

Page 2 of 2 FirstFirst 1 2

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts