ROG Centurion MCU2.2/DSP2.4 - Modified firmware with crossover & downmix

[MasterC@ASUS]

Hello, I know where the fault is and it is in the default driver of the 2 channel 16bit 48000hz DVd quality microphone. If I change it to cd quality it works with the dvd Not, what can I do? I reinstalled the microphone firmware drivers and program for this.. all from 0, and persist the problem. Arrived at this point how can I fix it? Thank you.

Have you tried lowering or turning off Noise Gate?
How about the ENC switch at the bottom of the Audio Station?
If it's only one game, then just change it to CD quality?

[xyz56789xyz]

Due to the feedback received from forum users, we have created a modified firmware to:
1. Dramatically boost the volume of side and rear surround channels (Gunfire & Footsteps profiles)
2. Rerouted and increased bass from surround channels to the subwoofer channel. (Gunfire profile)
3. Allow stereo mode for speakers connected to the audio station.
4. Fixed OCP (over-current protection) issue after reboot.

Hi, thanks for your effort in frequently optimizing the headset driver.

About the third point, this enhancement very good for those, include me, only have stereo speakers only. After update to MCU2.2/DSP2.4, I found that:
In headset mode with stereo mode, the sonic studio will grey out individual channel adjustment bar but in speakers mode with stereo mode, individual channel adjustment bars do not grey. I try to listen some multi-channel audio and adjust center volume, center volume, subwoofer volume, side volume and rear volume, the stereo speakers' audio does not change.

[staticrp]

And is it possible to download a newer version of the Sonic Radar Pro? Maybe update already drivers? Version 1.1.17 does not see new games

[S_the_Great]

Hello,

to be fair after almost 2 years it would be time to update the driver package.
Honestly I'm disappointed by Asus because it takes so much time for a 250€ headset to get some updates.

[Jey123456]

I was hoping that "Fixed OCP (over-current protection) issue after reboot." would fix my issue but didnt seem to.

Anyone else ever had the problem where the audio station doesnt work on a specific pc (with the usb port reset error), but work fine on others ?

I tried all firmware versions (including this beta), to no avail. Even the firmware updater does not detect the audio station on that machine, i have to upgrade the firmware on another pc.

[darcksoul]

I was hoping that "Fixed OCP (over-current protection) issue after reboot." would fix my issue but didnt seem to.

Anyone else ever had the problem where the audio station doesnt work on a specific pc (with the usb port reset error), but work fine on others ?

I tried all firmware versions (including this beta), to no avail. Even the firmware updater does not detect the audio station on that machine, i have to upgrade the firmware on another pc.

Same for me.
Work on my old laptop but stop working on my actual PC.
Error on usb 2 and nothing on USB 3.



I'm going crazy and ASUS don't care at all. We spend so much for this ****y headphone....