cancel
Showing results for 
Search instead for 
Did you mean: 

Crosshair Vi Hero 0d Error

Tavsalli
Level 7
Hi,

Install the latest version of the ASUS page, When I run the rams at high speed (2933mhz & 3000 mhz), I get a 0d error code. The 0d error has been reduced, but it continues to come out. How can I get rid of 0d error? There is no error at 2800 MHz.


Note:I get a 0d error when starting the computer. I have no problems in the Windows environment.
11,272 Views
5 REPLIES 5

skellattarr
Level 10
funny thing I got od error yesterday after I cleaned the dust out of my computer and I noticed that one of the ram modules wasn't lighting up so I reseated it now everything ok. try reseating your ram
amd ryzen 9 3950x
CROSSHAIR Viii hero
Corsair Hydro Series H115i
G.SKILL Trident Z 3200mhz 64gb 4x16 timings 16,18,18,38
asus rog strix gtx 1080
TOSHIBA 3TB hdd 3x a total of 9tb, 10 tb hdd and a 1tb mushkin ssd
corsair axi 1200i 1200 watt psu
thermal take view 71 case

skellattarr wrote:
funny thing I got od error yesterday after I cleaned the dust out of my computer and I noticed that one of the ram modules wasn't lighting up so I reseated it now everything ok. try reseating your ram


I've tried it many times. The problem is not resolved.

skellattarr
Level 10
we must have the same memory, on bios 6301 I got mine to run at 2933 by setting the d,o,c,p and setting the frequency from 3000mhz to 2933mhz and setting the dram voltage to 1.395 set the voltage to 1.38 and it will be 1.395
amd ryzen 9 3950x
CROSSHAIR Viii hero
Corsair Hydro Series H115i
G.SKILL Trident Z 3200mhz 64gb 4x16 timings 16,18,18,38
asus rog strix gtx 1080
TOSHIBA 3TB hdd 3x a total of 9tb, 10 tb hdd and a 1tb mushkin ssd
corsair axi 1200i 1200 watt psu
thermal take view 71 case

skellattarr
Level 10
sorry I had voltage wrong at first I got up too early I edited my post now is right
amd ryzen 9 3950x
CROSSHAIR Viii hero
Corsair Hydro Series H115i
G.SKILL Trident Z 3200mhz 64gb 4x16 timings 16,18,18,38
asus rog strix gtx 1080
TOSHIBA 3TB hdd 3x a total of 9tb, 10 tb hdd and a 1tb mushkin ssd
corsair axi 1200i 1200 watt psu
thermal take view 71 case

syldon
Level 9
0d is very early within the bios start up checks. It is having issues talking to the CPU instruction set. Remove all devices from the mobo. Leave only the power cables connected, no CPU, memory or gfx card. Reflash the bios to check that a stable revision has been implemented. Check CPU and CPU socket for contamination and damage before reseating. Add each device one by one, and check for boot errors on each connection.