Results 1 to 4 of 4
  1. #1
    New ROGer Array hart99 PC Specs
    hart99 PC Specs
    MotherboardRAMPAGE IV FORMULA
    ProcessorIntel Core i7 3960X

    Join Date
    Oct 2018
    Reputation
    10
    Posts
    3

    Unhappy Rampage iv formula gen3

    Hello this is my first post and I need some help with my motherboard.
    I know my system to a little old but I'm hoping someone could help me figure out what's going on with it.
    So my problem is i am trying to get my Video Cards to go in to Gen3 mode.
    But every time I set it in the Bios upon rebooting I will get a debug code 94 or 96 and the system will not boot...sometimes it will boot into windows but it will take many tries for it to do so.
    If I set Gen2 mode there is no problem whatsoever system boots fine...

    Operating System
    Windows 10 Pro
    CPU
    Intel Core i7 3960X
    Sandy Bridge-E
    RAM
    32.0GB DDR3 @ 666MHz (9-9-9-24)
    Motherboard
    RAMPAGE IV FORMULA

    NVIDIA GeForce GTX 1070
    NVIDIA GeForce GTX 1070
    ForceWare version: 416.34
    SLI Enabled
    Storage
    1863GB Seagate (SATA )
    442GB Intel Raid 0 Volume (RAID (SSD))
    111GB OCZ-AGILITY3 (SATA (SSD))
    111GB OCZ-AGILITY3 (SATA (SSD)

    Thanks in advance to anyone that can offer any insight

  2. #2
    New ROGer Array hart99 PC Specs
    hart99 PC Specs
    MotherboardRAMPAGE IV FORMULA
    ProcessorIntel Core i7 3960X

    Join Date
    Oct 2018
    Reputation
    10
    Posts
    3

    Unhappy

    Anyone

  3. #3
    ROG Member Array MarcT PC Specs
    MarcT PC Specs
    MotherboardASUS ROG Strix X470-I Gaming
    ProcessorAMD Ryzen 2700X
    Memory (part number)2x 16 GB G.Skill TridentZ RGB F4-320016D-32GTZRX
    Graphics Card #1ASUS ROG Strix RTX 2080ti Gaming, 11 GB
    Sound Cardonboard
    Monitor31,5" LG 32GK850G-B G-Sync 2560x1440, 144 Hz
    Storage #1Intel 660P M.2 SSD 512 GB
    Storage #2Intel 660P M.2 SSD 2 TB
    CPU CoolerAMD Wraith Prism
    CaseThermaltake P1
    Power SupplyASUS ROG Thor 850 Watt
    Keyboard Logitech G410
    Mouse Logitech G305
    Headset Philips Fidelio X2HR/00 High Resolution Over-Ear Kopfhörer + V-MODA BoomPro Mikrofon
    Mouse Pad Logitech G840
    Headset/Speakers Teufel Motiv 5
    OS Windows 10 Home 64bit
    Network RouterFritz!Box 6590
    Accessory #1 Logitech G305
    Accessory #2 Thrustmaster HOTAS X +
    MarcT's Avatar
    Join Date
    May 2014
    Reputation
    10
    Posts
    6

    Quote Originally Posted by hart99 View Post
    Hello this is my first post and I need some help with my motherboard.
    I know my system to a little old but I'm hoping someone could help me figure out what's going on with it.
    So my problem is i am trying to get my Video Cards to go in to Gen3 mode.
    But every time I set it in the Bios upon rebooting I will get a debug code 94 or 96 and the system will not boot...sometimes it will boot into windows but it will take many tries for it to do so.
    If I set Gen2 mode there is no problem whatsoever system boots fine...

    Operating System
    Windows 10 Pro
    CPU
    Intel Core i7 3960X
    Sandy Bridge-E
    RAM
    32.0GB DDR3 @ 666MHz (9-9-9-24)
    Motherboard
    RAMPAGE IV FORMULA

    NVIDIA GeForce GTX 1070
    NVIDIA GeForce GTX 1070
    ForceWare version: 416.34
    SLI Enabled
    Storage
    1863GB Seagate (SATA )
    442GB Intel Raid 0 Volume (RAID (SSD))
    111GB OCZ-AGILITY3 (SATA (SSD))
    111GB OCZ-AGILITY3 (SATA (SSD)

    Thanks in advance to anyone that can offer any insight
    Hi,

    i don't know if i can help you, but i have the same board and for activating gen3 i used this:

    https://nvidia.custhelp.com/app/answ...n-x79-platform

    I never had an error message like you (btw. did you get it in the BIOS or in Windows?), but without it GPU-Z always shows me PCIe 2.0. Sometimes, think after an Nvidia or Windows Update, i have to reinstall it again and it works for a while. So i check it from time to time.

    Hope that helps you.

  4. #4
    New ROGer Array hart99 PC Specs
    hart99 PC Specs
    MotherboardRAMPAGE IV FORMULA
    ProcessorIntel Core i7 3960X

    Join Date
    Oct 2018
    Reputation
    10
    Posts
    3

    thank you that got it working

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •