Deleted

[Enderwiggin03]

Very good theory. The memory training seems very drawn out in the new BIOS

Think there's a better way to "teach"? The memOK! Switch?

[port79]

I will stay on bios stock for my asus maximus XI formula ATM.
The latest is 0703 and theres no information about it .
If it is related to livedash not loading preloaded animated gifs, then I will flash it .
Btw anyone has or manage to load the preloaded animated gifs?
Because mine is not loading , cpu temps dram etc are working
I have the latest aura, AI suite, livedash installed .
Any tricks to make it work?any tricks?

Thanks

[Ch3vr0n]

0602 is safe to use. Newer ones not so much, and don't use EZ flash on a single bios board. A friend of mine bricked his M XI Hero this way.

Then you might just scrap any asus board. Afaik they're all single BIOS and EZFlash works just fine. Been doing it since the M8F, never a single failure. Afaik the only way to brick, is to flash the wrong bios (something the bios id check should even prevent) and in such an event, thats what the bios flashback is for.

[Fedec96]

Been using 0802 on XI Code since the release - no problems so far.

[MrAgapiGC]

Been using 0802 on XI Code since the release - no problems so far.

Ok ... let me try these.

[MrAgapiGC]

Hi everyone,
ROG MAXIMUS XI CODE : https://dlcdnets.asus.com/pub/ASUS/m...-ASUS-0703.zip

Just install Bios 0703 bios on the Code XI. Testing and check how that do. Using XMP1 with multicore enhancemt AUTO (ASUS opt core ratio) On extreme tweaker Setup parameter 156 P0 5.0mhz, P1 4700mhz. My memories are 3600mhz bdie and check how that does before testing other funtions like AI, did nice on 0608 5.0 and 5.1 stable. well sort off. and manual 5.0 later. I do know that there some issues but i am ok. I am not a overclocker and less as a pro.

[MrAgapiGC]

Hi everyone,

New BIOS 0805 [01/02/2019] for ROG Maximus XI Apex/Code/Extreme/Formula/Gene/Hero/Hero (Wi-Fi) has just been released :


ROG MAXIMUS XI CODE : https://dlcdnets.asus.com/pub/ASUS/m...-ASUS-0805.zip


Thread updated.

Let me try it! Any idea the what the ME FW do change on what we have?

[CorePrime]

I have installed BIOS 0805 on Hero XI wifi using der8auer settings. Now testing with Cinebench my temps have increased from 58C to 77C.

i9 9900k
asus hero xi wifi
32 gb corsair veng pro rgb

[BorderJack]

Hello everyone! as a result of a BIOS update of my Maximus XI HERO via the Asus EZ Flash 3 (procedure via the internet), within the UEFI, my system will no longer start. The error message number 71 (PCH DXE SMM initialization is started) appears on the motherboard screen. After receiving a new motherboard from the supplier, who had advised me to replace it, I again found the aforementioned error 71.
Does anyone know how to help me?*
Is it possible that it compromised the cpu?*
Thanks a lot.

[Phillyflyer]

Hello everyone! as a result of a BIOS update of my Maximus XI HERO via the Asus EZ Flash 3 (procedure via the internet), within the UEFI, my system will no longer start. The error message number 71 (PCH DXE SMM initialization is started) appears on the motherboard screen. After receiving a new motherboard from the supplier, who had advised me to replace it, I again found the aforementioned error 71.
Does anyone know how to help me?*
Is it possible that it compromised the cpu?*
Thanks a lot.

Bios flash may have been corrupted.....try reflashing bios via USB.