Hello to the asus community, I've been trying to get my memories to run at the established speed, but it seems impossible. I have 2 64GB kits
CMD64GX4M4B3466C16 (Does not appear in the qvl)
Y
CMU64GX4M4A2666C16 (It does not appear in the qvl, but corsair says that if it is ready for AMD x399:
https://www.corsair.com/uk/en/amd-x399).
My motherboard is: asus rog strix x399-e gaming (bios version: 0808)
With processor: amd ryzen threadripper 1920x
First I tried with the kit: 3466MHz, they start well at a frequency of 2133Mhz, but if I try to load the profile xmp never gives a video signal (orange led on). Also try to test with the: "DRAM Calculator for Ryzen", loading the specifications of the memory and the results of the program I copy them in the bios, but I only get beeps (3 and later it tells me that the bios configuration is not the correct one) .
Then I tried the 2666mhz kit (I'm not combining kits, they are all separately) they start well at a frequency of 2133Mhz, I charge the xmp profile but in this one I only get beeps and the message that the configuration is not correct. I did not want to use the configuration of the "DRAM Calculator for Ryzen" program in this model, since the voltage raises it to 1.35V (when they are 1.2V)
I know that memories work well because I have tested them on an ASUS x99-A II board with i7 Intel Core I7-6850k
I no longer know where to look, someone who has these models could advise me or share their bios configuration?