11-11-2018 09:34 PM - last edited on 03-06-2024 07:48 PM by ROGBot
11-11-2018 09:46 PM
kooj12 wrote:
ASUS MAXIMUS XI HERO (WI-FI)
i9 9900k
Corsair Vengeance LPX DDR4 4000MHz 32GB (2x16GB, Tested - 4000MHz - 1.35V - CL19 - 19-23-23-45)
Putting XMP profile I or II results in safemode post.
Have tried pumping voltages up,
DRAM: 1.4v
CPU VCCIO: 1.2v
CPU System Agent Voltage: 1.25v
Havent gone higher since a guide I checked out did recommend not going any higher. Have gotten both XMP profiles to work (without changing voltages), if i change frequency to 3600MHz. However that puts it with 4000MHz timings on 3600MHz. Anyhow id like it to work at 4000MHz as thats what ive paid for.
Is something busted? Was under the impression 4000MHz would work fine with XI hero and i9 9900k
edit: Have run memtest86 without errors
11-11-2018 10:11 PM
Enderwiggin03 wrote:
I have a Z390-E with GSkill 4266MHz, and I went with 1.35v VCCIO, 1.45v RAM (YMMV), 1.40v System Agent. See if that helps for you. I took into account my LLC too, which worked for me.
11-13-2018 01:19 AM
11-13-2018 01:43 AM
11-13-2018 02:02 AM
HiVizMan wrote:
The IMC of your cpu is going to be a factor too of course.
Could you run memtest at the settings you can get the memory to post at. I would be interested to see if there is anything kicked back.
Also could you try different slots and see if that helps at all. (assuming you have not done so already)
11-13-2018 02:17 AM
11-13-2018 03:39 AM
11-13-2018 10:40 AM
kooj12 wrote:
edit: ok ive no idea why the picture is upside down
11-13-2018 12:35 PM