11-18-2018 12:19 PM - last edited on 03-06-2024 07:41 PM by ROGBot
11-19-2018 10:50 AM
11-19-2018 12:01 PM
11-20-2018 12:02 PM
mdzcpa wrote:
The double boot up is normal when power had been disconnected from the motherboard. The system is "training" and forming baseline for your configuration and then applying normal set timings with applicable sub timings on the second boot. Baselines are lost when the board powers down.
The triple boot is needed when set timings (including under XMP) are a bit further from plug and play. It needs 3 cycles to properly set sub timings.
Is your memory on the QVL?
11-28-2018 09:13 PM
11-29-2018 01:21 AM