Hi,
I was unable to find stability around 4000/4133 with allot of tinkering, even RAJ profile was unstable at up to 1.8v.
Tried for days to find a sweet spot to boot the RAM without the MEMOK Toggle switch....so now I just leave it on. I will figure out a lower VCCIO and SA when I gain some patience.
Tried it again today, and now its booting and benching at 4400 - 17:17:17:36:C2@1.6v, I was able to boot with 16:16:16:36:C2 but did not get past OS.
I did not test it yet with my manual CPU overclock 5.2@1.38v on all cores. Max temp 86 degrees after 8 hours of Realbench. I will consider using AI Overclock but I am having BSODs due to AI under volting even at 4.9/5 with everything auto including mem. New BIOS Soon?
My question is, what to tinker to tighten up and apply manual secondary timings? I am not that good with memory overclocking, any help appreciated.
Also the Gene has a toggle switch for the MEMOK, I am just leaving it on as every few restarts it wants to renegotiate the VCCIO and SA which I just set back to Auto and restart. Let me know the best practice for this.
Cheers! Feel free to comment on your own experiences.