G20 Upgraded with ASUS RTX 2080 Turbo

[Cyb0rge]

damn that’s horrible to hear man. You did change the jumpers for the power supply right? I was really wary buying rtx after I heard about the few confirmed bad graphic cards due to the on board memory. Looking back on my posts you can clearly see I’m no expert but I’d try completely reinstalling from scratch refollowing guides. I’m having a few problems but nothing on that level. The few black screens I’ve had were from me trying too overclock the card then after I hard restarted it I couldn’t get the card to power back on. After a few minutes of frantically panicing I took a look at the actual psu and discovered the lil green light wasn’t glowing anymore. I unplugged the power cord from the power supply waited a few seconds and then boom power was back to the graphics card.*

Idk maybe try that and in the meantime also try contacting nividia and whatever brand you bought if not a FE

I’m still having my same keyboard issue but I’m going to try like I told you a full reinstall *

I have the g20aj with a hp 2080, I’d be dumbfounded if it was a issue with your computer with yours being the newer model. I was even able to of the card at +124 to the core clock and +650 to the memory I just got it stable been running metro exodus all day today with rtx on now this is my first all day test but no issues with that part so far

[spartan_hoplite]

I’m still having my same keyboard issue but I’m going to try like I told you a full reinstall *

Have you tried what i instruct you before?
"To fix that you need to go to bios setting with working keyboard, but you cant, coz your usb are not working when booting, so what you need to do now is take off your rtx 2080 first, and run your pc through intel integrated graphic(without the RTX gpu attached). Plug hdmi cable to the integrated port.
Now you can go to bios setting with working keyboard, and change some setting"

"Go to "advance", "pch storage configuration" then set "Enabled" on Pcie Nand configuration" to fix random blackscreen
(But in your case are different, you got a blackscreen becauce you Overclock your GPU too much, just do mild overclocking it will be fine and NOT to increasing the power limit, because the maximum power draw for the GPU is only 230 watt, overclocking can make the GPU pull more than 230watt of power, the power board cannot take it, if so your Adapter will shut off automatically. To fix that you just need to shut down, unplug and replug it make it work again)

"and then go to "USB Configuration", MAKE SURE Intel xHCI mode was NOT set to "smart auto" or "enabled", You MUST " DISABLED" it, then only your usb peripheral will works (keyboard & mouse) when using RTX card.

[Cyb0rge]

Have you tried what i instruct you before?
"To fix that you need to go to bios setting with working keyboard, but you cant, coz your usb are not working when booting, so what you need to do now is take off your rtx 2080 first, and run your pc through intel integrated graphic(without the RTX gpu attached). Plug hdmi cable to the integrated port.
Now you can go to bios setting with working keyboard, and change some setting"

"Go to "advance", "pch storage configuration" then set "Enabled" on Pcie Nand configuration" to fix random blackscreen
(But in your case are different, you got a blackscreen becauce you Overclock your GPU too much, just do mild overclocking it will be fine and NOT to increasing the power limit, because the maximum power draw for the GPU is only 230 watt, overclocking can make the GPU pull more than 230watt of power, the power board cannot take it, if so your Adapter will shut off automatically. To fix that you just need to shut down, unplug and replug it make it work again)

"and then go to "USB Configuration", MAKE SURE Intel xHCI mode was NOT set to "smart auto" or "enabled", You MUST " DISABLED" it, then only your usb peripheral will works (keyboard & mouse) when using RTX card.

I’m doing that now I’ll update when completed*

[Cyb0rge]

I’m doing that now I’ll update when completed*

thank you keyboard is working again but no dice for the hard drive*

[Cyb0rge]

Have you tried what i instruct you before?
"To fix that you need to go to bios setting with working keyboard, but you cant, coz your usb are not working when booting, so what you need to do now is take off your rtx 2080 first, and run your pc through intel integrated graphic(without the RTX gpu attached). Plug hdmi cable to the integrated port.
Now you can go to bios setting with working keyboard, and change some setting"

"Go to "advance", "pch storage configuration" then set "Enabled" on Pcie Nand configuration" to fix random blackscreen
(But in your case are different, you got a blackscreen becauce you Overclock your GPU too much, just do mild overclocking it will be fine and NOT to increasing the power limit, because the maximum power draw for the GPU is only 230 watt, overclocking can make the GPU pull more than 230watt of power, the power board cannot take it, if so your Adapter will shut off automatically. To fix that you just need to shut down, unplug and replug it make it work again)

"and then go to "USB Configuration", MAKE SURE Intel xHCI mode was NOT set to "smart auto" or "enabled", You MUST " DISABLED" it, then only your usb peripheral will works (keyboard & mouse) when using RTX card.

Thank you!! Turns out I didn’t fully explain my issue your solution helped but was only part of the problem. I guess I had a degraded raid profile on the hard drive that was also hindering it so I deleted it completely and restored without raid. I’m not sure on the benefits and I don’t know how to properly set it up (obviously) so I’m just not going to use it no longer having any issues I’ll update if that changes**

[spartan_hoplite]

I managed to modified my G20ci bios and now works with coffelake processors.

[Mao_Setzer]

I managed to modified my G20ci bios and now works with coffelake processors.

WOW !!
How did you manage to do that, if you could share pleeease ?!

[spartan_hoplite]

WOW !!
How did you manage to do that, if you could share pleeease ?!

you can use this guide: https://www.win-raid.com/t3413f16-GU...herboards.html

[spartan_hoplite]

The Cheap Core i5 9400F works well too, surprisingly it was faster than i7 7700 and the temperature is very low.
here is the validation: https://valid.x86.fr/02such

[kyrell]

Can it also be applied on cb versions?