11-25-2018 03:57 AM - last edited on 03-06-2024 07:42 PM by ROGBot
11-25-2018 05:10 AM
11-25-2018 05:26 AM
11-25-2018 05:36 AM
11-25-2018 07:03 AM
G75rog wrote:
If you look closely at the manual you find one side of the Dimm.2 card is selectable between CPU and PCH lanes while the other side is CPU only. Can you run your Raid on the CPU lanes without having to use a Windows array?
11-25-2018 07:05 AM
11-25-2018 07:40 AM
T3kno wrote:
Where in the manual did you find that info?
If this is correct, my RAID is build with one NVME over CPU and the other over PCH. I dont think this is the case?
I selected Intel RAID Premium in the SATA controller section, then rebooted, BIOS again and pressed F11, clicked on RAID and could select my 970 PRO.
But both were displayed as PCH.
11-25-2018 08:58 AM
JustinThyme wrote:
Your raid is over PCH, both. Im guessing you used the wizard which will reassign settings. Im afraid either I failed in the presentation or there is another barrier between presentation and comprehension. Please read all the posts here by searching VROC and it will become clear. I dont want to be verbose when its all here, several of us spent a lot of $$ and even more time on this. The search function is your friend.
Or feel free to continuing trying. Im simply conveying that which was done, tried, tested, retested, reconfigured and retested to save you some $$ and your blood pressure as well as attempt to explain why any drive other than Intel will not reap the benefits of VROC. The only option to get past the bottle neck is to put the drives on an hyperX16 card and run software raid. Oher than that you wont be able to get more than ~3500MB/s sequential reads with non intel drives.
BTW also tried two M2 optane drives on the DIM.2 and MOBO and they would not do VROC there, only on the HyperX16 where its basically a direct connection to the CPU.
Enjoy your venture!!:cool:
11-26-2018 08:55 PM
Deepbluee wrote:
I m wondering what do you think about make raid 0 with 2 Samsung 960 pros over PCH ?
Do you think it's a slight improvement or its better to use a single drive in non-raid form?
11-25-2018 09:52 AM
T3kno wrote:
Where in the manual did you find that info?
If this is correct, my RAID is build with one NVME over CPU and the other over PCH. I dont think this is the case?
I selected Intel RAID Premium in the SATA controller section, then rebooted, BIOS again and pressed F11, clicked on RAID and could select my 970 PRO.
But both were displayed as PCH.