Page 3 of 3 FirstFirst 1 2 3
Results 21 to 27 of 27
  1. #21
    New ROGer Array
    Join Date
    Nov 2019
    Reputation
    10
    Posts
    44

    Quote Originally Posted by TX2000 View Post
    i ended up replacing the thermal pads with K5-Pro. temps are good so far but not worried if the pad did contact or not. Also i just put the paste in a syringe because that stuff gets everywhere.

    Attachment 83795
    Attachment 83796
    Attachment 83797
    Attachment 83798
    imo too much is too much, you will se when you take off the heat sink next time.

  2. #22
    ROG Guru: Yellow Belt Array
    Join Date
    Jul 2013
    Reputation
    11
    Posts
    134

    Quote Originally Posted by Tor_Spo View Post
    imo too much is too much, you will se when you take off the heat sink next time.
    i cleaned the excess when i put the heat sink on

  3. #23
    New ROGer Array PowerPein PC Specs
    PowerPein PC Specs
    Laptop (Model)GL504GS
    MotherboardASUS Rog Scar II
    Processori7-8750H
    Memory (part number)Kingstone hyperx 2X16 GB
    Graphics Card #1Geforce GTX 1070
    Sound CardRealtek/ USB Roccet Juke
    Monitor1080P 144 Hz
    Storage #1Toshiba SSD PCIe
    Storage #2Toshiba SATA III 2 TB
    Power Supplyoriginal
    Keyboard USB ASUS strix tactic pro
    Mouse TRUST gaming mouse
    Headset Sonic G910 7.1 vibration
    Headset/Speakers Genius GX 3000 2.1
    OS Win 10 Enterpise
    Network RouterASUS RT AC 1200 G
    PowerPein's Avatar
    Join Date
    Jan 2020
    Reputation
    10
    Posts
    30

    I replace it with liquid metal (thermal grizzly conducttonaut) and the rest of the fridge: thermal grizzly kryonaut. Thermal conductivity: ~78 W/(m*K) and ~13 W/(m*K). CPU and GPU based on the test program at full load maximum 75-78 °C, without cooling beds. With cooling beds: 73 °C. (100% CPU with 3800 MHz), 100% GPU with 1780 MHz). Far Cry 5: New Dawn full graphics settings used: 70-73 °C. But original thermal paste: 100% CPU with 2400!! MHz cpu clock: 95 °C !!! 1 week used and i need replace first time on kryonaut. 1 year later the video card fan had to be replaced and then I put liquid metal in it.
    The thing is, I used the brown Teflon tape to protect the video card capacitors.
    What I do not understand is why is the cheapest thermal conductive paste placed in such a machine? For the first time, the paste broke properly. It was full of bubble traces.
    Let's say you are not sure if you can replace it with liquid metal, so people would rather use regular paste or have it replaced by a specialist.

  4. #24
    ROG Member Array
    Join Date
    Nov 2017
    Reputation
    10
    Posts
    16

    Quote Originally Posted by TX2000 View Post
    i ended up replacing the thermal pads with K5-Pro. temps are good so far but not worried if the pad did contact or not. Also i just put the paste in a syringe because that stuff gets everywhere.

    Attachment 83795
    Attachment 83796
    Attachment 83797
    Attachment 83798
    Hi ! Any update ?
    How's the difference PADS / K5-Pro ?
    Any Difference when look at GPU/CPU temp ?
    Last edited by mar_ga; 03-02-2020 at 09:45 PM.

  5. #25
    New ROGer Array
    Join Date
    Mar 2019
    Reputation
    10
    Posts
    4

    Total newb HERE

    can i use apply the noctua h1 and not do the thermal pads? I a new to this and my laptop throttles pretty much every time and even when not playing games. Can anybody help me with this tedious process? i havent bought any thermal paste or thermal pads yet but please do suggest what all should i get

  6. #26
    ROG Enthusiast Array
    Join Date
    Feb 2018
    Reputation
    10
    Posts
    72

    I just repasted my 704gw with noctuua nth2 for cpu and gpu die, leaving the horrid stock thermal paste on vrms... Results? i don't know what other people done here with liquid metal, but my result are similar with a traditional good paste.

    On gaming i'm at about 75-78 for gpu and 75-82 for cpu, in turbo mode. Cinebench r20 goes from 3.3ghz at 95° to 3.9 at 78°, scoring from 2650 to 3050 (huge improvement), and gpu loses about 10 degrees in average games.

    I repeat, i only repasted cpu and gpu with a non conductive (but good) paste, leaving the gum stock paste on vrm and just reclosing (many other done like me so i was pretty sure it have been worked and it is!)

    Another friend do the same with his scar 1 going from 98° in cpu to 85, and from 91 from gpu to 82. So don't risk with LM on a laptop, because there's a GIANT risk of it goes over the heatsink, and actually a good paste is sufficient to a proper cooling, maybe LM is another 5 to 10° better but worth the risk if the lap is fully performing with a good non conductive paste? for me the answer is NO.

  7. #27
    ROG Guru: Yellow Belt Array
    Join Date
    Jul 2013
    Reputation
    11
    Posts
    134

    Quote Originally Posted by mar_ga View Post
    Hi ! Any update ?
    How's the difference PADS / K5-Pro ?
    Any Difference when look at GPU/CPU temp ?
    it its working fine so far. a little better for me because in some areas the pads didn't touched well.
    I just did it for peace of mind mostly.

Page 3 of 3 FirstFirst 1 2 3

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •