12-02-2018 02:18 PM - last edited on 03-06-2024 07:31 PM by ROGBot
12-02-2018 06:52 PM
12-08-2018 03:52 PM
michalmx0 wrote:
Do you have any offset for AVX?
I think I also have a good sample 5GHz AVX on 1.27V max temps at Prime95 (with AVX) SmallFFT 85C. Other programms (OCCT, Asus Realbench, IBT) with AVX enabled passes tests with 1.25V, only Prime95 cause BSOD after about 10 mins. So I suggest you to test your CPU with Prime95 AVX enabled in smallFFT to be sure it's fully stable. But Prime95 heavily load CPU and produces massive amount of heat. In other programms with AVX tests on 5GHz 1.27V temps were about 72C only.
On other try, I set 5GHz (AVX offset -2) and 1.23V and it's also fully stable. Prime95 (with AVX) temps stops about 78C.
Maybe I can get 5.5GHz 😄
My score in BIOS average is 160-170. Max I've reached was 191. But for me this is not a determinant, because in normal use my fans spinning around 800 rpms and even under game load don't spin faster, keeping temps under 70C. 191 pts I get when testing at full rpm (2000) speed, but suggested voltage for 5GHz AVX wasn't stable.
12-17-2018 02:02 PM
mdzcpa wrote:
You have a great chip. A bit better than mine for sure!! Congrats!
With my 5.1 Ghz OC I was running an offset of -1, so 5Ghz for AVX at 1.28v. CPU package diode does hit 83c under AVX Prime Small FFT.
I have now reached 5.2ghz stable with an AVX offset of -2 at 1.315v. AVX Small FFT hits 88c now. But surprisingly my cooler score has now jumped to 207 after benching for a few hours at these speeds. I haven't been able to get AVX Small FFT Prime stable for more than 20 minutes at more than 5Ghz all core with voltage under 1.35v. So I'm not going to push it. I'm also holding my RAM at 4000 C17. If this is where I top out I'd be a very happy camper.
Currently sitting at 5.2GHZ @ 1.315 AVX -2, LLC6, Adaptive Voltage, RAM at 4000 17-17-17
12-03-2018 04:57 AM
12-04-2018 06:49 PM
12-05-2018 02:50 AM
michalmx0 wrote:
Currently running G.Skill Trident Z RGB 2x8GB 3600MHz CL16 at 4000MHz 18-18-18-40 1.35V, VCCIO 1.15V, VCCSA 1.2V without problems. It needs some more testing, but seems to be stable.
12-08-2018 04:52 AM
12-05-2018 12:29 AM