Hello, I tried to run 2 CGs, one on the pcie1gen3x8 and second in the pcie2gen3x4 and to set the primary display as the second.
CGs are a GTX 1060 and a GTX 760. Yet even if I set the interface Bus under tool/GPU info, it refuses to boot on this one and boots the one I didn't told him to boot to.
THe CG#2 is visible in the POST and usable afterwards, but it doesn't want to boot to it....
This is a major BUG.... or I didn't manage to make it work as intended, please help me and fix this :mad: