Page 1 of 2 1 2 LastLast
Results 1 to 10 of 11
  1. #1
    New ROGer Array
    Join Date
    Dec 2018
    Reputation
    10
    Posts
    2

    asus rog strix z390 f gaming 1 long beep followed by 3 short beeps

    Hi

    My new setup throws out 1 long beep followed by 3 short beeps on boot up.

    From what I read in the manual this is something to do with no VGA detected, which isn't surprising as I have no VGA outputs on the motherboard or GPU

    Everthing appears to work perfectly fine when booted so I am not sure there is actually an issue but the beeps are concerning.

    This is what I have:

    asus rog strix z390 f gaming
    Intel Core i7 9700K 3.6 GHz Processor
    MSI GeForce RTX 2070 ARMOR 8GB Graphics Card
    G.Skill Trident Z RGB 16GB Kit DDR4 3200MHz RAM
    Samsung 970 EVO V-NAND M.2 250GB SSD
    700 watt PSU
    Various internal HDDs/SSD

    Can anyone shed any light onto whether I should be worried or if there is anything I can do to stop the beeps?

    Many thanks

    DJC

  2. #2
    New ROGer Array
    Join Date
    Dec 2018
    Reputation
    10
    Posts
    2

    Hi all

    I think I have gotten to the bottom of this. If I power on before I power up my monitor I get the beeps. It must be that if it detects no display (whether VGA, HDMI, DP or otherwise) then it will output this beep pattern as it has nothing to output BIOS screen to. Just tested it by making sure monitor was on and ready and I didn't get the beeps.

    Cheers

    DJC

  3. #3
    New ROGer Array
    Join Date
    Jan 2019
    Reputation
    10
    Posts
    2

    Hi there,

    same problem with my Asus ROG STRIX Z390 E Gaming and MSI GeForce RTX 2080 Ventus 8G.

    my system:

    Intel Core i7-9700K, 8x 3.60GHz cooled with Noctua NH-D14
    ASUS ROG Strix Z390-E Gaming
    Crucial Ballistix Sport LT grau DIMM Kit 32GB, DDR4-3000, CL16-18-18
    MSI GeForce RTX 2080 Ventus 8G, 8GB GDDR6
    Samsung SSD 970 EVO 250GB, M.2
    Samsung SSD 970 EVO 1TB, M.2
    be quiet! Straight Power 11 650W ATX 2.4


    1 long beep followed by 3 short beeps, every time I start my system, but Windows starts anyway.
    If I start the system right again, there is no beep.
    Tried different PCIe slot but the same problem.
    I always connect my system to my LCD TV via HDMI.
    When I see something on my TV, there is no beep.

    Yesterday I tried my old TFT-Monitor and turned it on before I starded my system (according to this thread)
    And... there was no beep

    I think you are right.
    Last edited by LordHelmchen; 01-17-2019 at 10:26 AM.

  4. #4
    New ROGer Array
    Join Date
    Feb 2019
    Reputation
    10
    Posts
    2

    Hey all,
    I'm sorry if I bump this thread, I got the same problem with my system, anyone solved this?
    Probably some BIOS setting to change to avoid beeps when the monitor is off?
    My BIOS version currently is 0702

    My PC:
    Asus ROG Strix Z390-F Gaming
    LG IPS224 Monitor @60Hz plugged via HDMI
    Intel i5 9600k @3.7Ghz cooled with bequiet! Dark Rock 4
    EVGA Nvidia GTX 1050Ti SSC
    Corsair Vengeance RGB PRO 16GB DDR4 3000Mhz
    Samsung 970 EVO NVMe M.2 SSD 500GB
    Seagate Barracuda HDD 1TB 7200RPM
    Corsair RM750x 750W
    NZXT H700
    Last edited by Estriele; 02-27-2019 at 02:56 PM.

  5. #5
    New ROGer Array
    Join Date
    Jan 2019
    Reputation
    10
    Posts
    2

    nope sorry, haven't solved it yet

    if my monitor is turned on, there is no beep

    if I start my computer and the monitor is turned off -> BEEEEEEP BEEP BEEP BEEP
    when I turn my monitor on after the beeps, my system starts anyway

  6. #6
    ROG Guru: Brown Belt Array davemon50 PC Specs
    davemon50 PC Specs
    Laptop (Model)Asus G752VY-DH72 (17") and Asus G752VT-DH74 (17")
    MotherboardAsus ROG LGA2011-v3 Rampage V Edition 10, x99 EATX
    ProcessorIntel Core i7-6950X Extreme 10-core 25MB Cache 3.0 GHz
    Memory (part number)Corsair Vengeance LPX Red DDR4 DRAM 64GB-4x16 3333 (CMK64GX4M4B3333C16R)
    Graphics Card #1Sapphire Nitro Radeon R9 Fury 4GB HBM Backplate
    Graphics Card #2Sapphire Nitro Radeon R9 Fury 4GB HBM Backplate
    Sound CardAsus SupremeFX Hi-Fi Audio DAC
    Monitor(2) Dell UltraSharp U2515H 25-inch monitors
    Storage #1(3) SSD's - Samsung 960 1TB M.2, Intel 535 480G, Intel 510 250G
    Storage #2(3) HDD's - Western Digital Caviar Black 2TB 3.5-in SATA III 64MB Cache
    CPU CoolerCorsair Hydro Series H80
    CaseCorsair Obsidian Series 650D Black, ATX, Mid Tower
    Power SupplyCorsair Digital AXi-Series AX1200i (1200W) 80+ Platinum Rating
    Keyboard Logitech Wireless K360
    Mouse Logitech Wireless MX Anywhere 2
    Headset HyperX Cloud II
    OS Windows 10 Pro 64-Bit
    davemon50's Avatar
    Join Date
    Apr 2017
    Reputation
    45
    Posts
    1,002

    You can go into your BIOS for those boards and try changing two settings to see if it helps:
    - Graphics Configuration > Primary Display to PCIE
    - Graphics Configuration > iGPU Multi-Monitor to Disabled

    But basically you should leave your monitor on Sleep instead of turning it off. For a TV might be problematic, and for that LG IPS224 monitor you might have to turn off the Super Energy Saving mode.

    If you haven't listed your monitor in this thread you should probably give that info for a question where you are asking about it.
    Davemon50

  7. #7
    New ROGer Array
    Join Date
    Feb 2019
    Reputation
    10
    Posts
    2

    Thank for the reply davemon50
    I changed the primary display to PCIE (it was set to Auto) and iGPU Multi-Monitor was disabled already but the beeps still persist if I start my system and the monitor is off, the system starts and everything works like a charm, also the Super Energy Saving mode is already disabled on my monitor.

  8. #8
    ROG Guru: Brown Belt Array davemon50 PC Specs
    davemon50 PC Specs
    Laptop (Model)Asus G752VY-DH72 (17") and Asus G752VT-DH74 (17")
    MotherboardAsus ROG LGA2011-v3 Rampage V Edition 10, x99 EATX
    ProcessorIntel Core i7-6950X Extreme 10-core 25MB Cache 3.0 GHz
    Memory (part number)Corsair Vengeance LPX Red DDR4 DRAM 64GB-4x16 3333 (CMK64GX4M4B3333C16R)
    Graphics Card #1Sapphire Nitro Radeon R9 Fury 4GB HBM Backplate
    Graphics Card #2Sapphire Nitro Radeon R9 Fury 4GB HBM Backplate
    Sound CardAsus SupremeFX Hi-Fi Audio DAC
    Monitor(2) Dell UltraSharp U2515H 25-inch monitors
    Storage #1(3) SSD's - Samsung 960 1TB M.2, Intel 535 480G, Intel 510 250G
    Storage #2(3) HDD's - Western Digital Caviar Black 2TB 3.5-in SATA III 64MB Cache
    CPU CoolerCorsair Hydro Series H80
    CaseCorsair Obsidian Series 650D Black, ATX, Mid Tower
    Power SupplyCorsair Digital AXi-Series AX1200i (1200W) 80+ Platinum Rating
    Keyboard Logitech Wireless K360
    Mouse Logitech Wireless MX Anywhere 2
    Headset HyperX Cloud II
    OS Windows 10 Pro 64-Bit
    davemon50's Avatar
    Join Date
    Apr 2017
    Reputation
    45
    Posts
    1,002

    Quote Originally Posted by Estriele View Post
    Thank for the reply davemon50
    I changed the primary display to PCIE (it was set to Auto) and iGPU Multi-Monitor was disabled already but the beeps still persist if I start my system and the monitor is off, the system starts and everything works like a charm, also the Super Energy Saving mode is already disabled on my monitor.
    That monitor is supposed to have a sleep function (like most). Is there some Sleep setting for the monitor that doesn't show up in the manual? i.e. how does one enable or disable sleep on that monitor? I see no instruction for it. I would prefer to let it sleep and use some standby power rather than have the computer beep at me every day. Although personally I just leave my computer running all the time.
    Davemon50

  9. #9
    New ROGer Array Gabar PC Specs
    Gabar PC Specs
    MotherboardROG STRIX Z390-H GAMING
    ProcessorCore I9-9900K
    Memory (part number)F4-3600C18D-16GTZRX
    Graphics Card #1ROG-STRIX-GTX1080TI-O11G-GAMING
    Sound CardSound Blaster Z
    MonitorASUS ROG Swift PG279Q Gaming Monitor
    Storage #1WDS250G2X0C wd black nvme
    Storage #2SSD 960 EVO M.2 NVMe 1tb
    CPU CoolerMaster Liquid ML240R RGB Cooler Master
    CaseCooler Master MB530P
    Power SupplyG750M cooler Master
    Keyboard K70 RGB RAPIDFIRE Mechanical Gaming
    Mouse Razer Mamba TE
    Headset/Speakers AUDIO SURROUND 5.1 Z906 Logitech
    OS Win 10 Prp 64 Bit

    Join Date
    Mar 2019
    Reputation
    10
    Posts
    1

    I have the same problem with :

    Processor
    Core I9-9900K
    Memory (part number)
    F4-3600C18D-16GTZRX
    Graphics Card #1
    ROG-STRIX-GTX1080TI-O11G-GAMING
    Sound Card
    Sound Blaster Z
    Monitor
    ASUS ROG Swift PG279Q Gaming Monitor
    Storage #1
    WDS250G2X0C wd black nvme
    Storage #2
    SSD 960 EVO M.2 NVMe 1tb
    CPU Cooler
    Master Liquid ML240R RGB Cooler Master
    Case
    Cooler Master MB530P
    Power Supply
    G750M cooler Master
    Keyboard
    K70 RGB RAPIDFIRE Mechanical Gaming
    Mouse
    Razer Mamba TE
    Headset/Speakers
    AUDIO SURROUND 5.1 Z906 Logitech
    OS
    Win 10 Prp 64 Bit

    when the monitor sleep beep beep beep, i update the bios i setting bios to primari display pcie but the problem is present.

  10. #10
    New ROGer Array
    Join Date
    Nov 2018
    Reputation
    10
    Posts
    2

    I have ther same problem but different main board:

    Asus Maximus Hero XI z390
    i9900k
    32Gb (4x8) Corsair RAM
    Zotac GTX 2080 GTI AMP
    Various SSD

    One beep followed by 3 short on boot SOMETIMES.

    I get this probably once in 4 or 5 boots. If I leave it the system goes into windows fine and Windows displays on my monitor but there doesn't seem to be a display on boot (BIOS messages etc.)

    *Note* I always "Shut down" my system, the beeps happen on a power on. However I do not disconnect my system from the mains.

    I've had it since building the system and through a couple of BIOS flashes.

    I suspect it is caused by the BIOS not waiting long enough for the graphics card to initialise and assumes the card has failed.

    I doubt the monitor has any bearing on this at all.

    Usually if I completely power off and back on again there are no beeps. However I did have one occasion where I got beeps twice.
    Last edited by DragonRR2; 08-04-2019 at 11:20 AM.

Page 1 of 2 1 2 LastLast

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •