Results 1 to 1 of 1
  1. #1
    ROG Junior Member Array
    Join Date
    Sep 2016
    Reputation
    10
    Posts
    4

    P10S-M WS QCODE: FF With UNRAID OS

    Hi all,

    Not sure if this is the right place to ask but considering this is not too important it's better to ask. So, I have a small media server running UNRAID OS (ver.: 6.6.6) from a Flash Drive. The Motherboard boots just fine, not a single issue - going strong. At first the QCODE indicator shows A0 but once unraid boots, the qcode changes to FF but nothing else is happening. The OS boots and the system is going strong without the slightest issue. I'm using 2x8TB Western Digital Red drivers for unraid pools with a Samsung 970 EVO NVME as cache drive with the OS booting from a SanDisk flash drive. I also tried out the motherboard using Windows 10 booting from the NVME drive in which case the QCODE remained at A0, but with Unraid it changes FF immediately once unraid boots then everything is fine. Anyone seen similar behavior?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •