©ASUSTEK COMPUTER INC. ALL RIGHTS RESERVED.

BOB1987 · ‎01-07-2019

Is there anyone here who can help me to overclock my CPU to 5.0 I am noob in this
Here is my pc setup

MOTHERBOARD : ASUS ROG MAXIMUX X HERO
CPU : INTEL I 7 8700 k
GPU: EVGA BLACK EDITION 1080 TI
RAM : G SKILL 32GB 3600 MHZ
PSU : EVGA 850 PLATINUM
COOLING: EVGA LIQUID COOLER 280 MM
I think i got good pc so i can go up to 5.0
But i need STEP by STEP help
THANKS! Ill pay if i need 20$ 😄 IF someone wants to teach me exacly so i have stable 5.0 GHZ

Please help. I watched some videos but i when i doo exalcly what they say my computer go to BLUE SCREEN
In attachment U can see my Temperatures of core

x-rated · ‎01-07-2019

reset bios to defaults and try these settings, it is almost the same as with 9900K https://imgur.com/a/OVPVIhT 🙂

BOB1987 · ‎01-07-2019

x-rated wrote:
reset bios to defaults and try these settings, it is almost the same as with 9900K https://imgur.com/a/OVPVIhT 🙂

What if i put a litle bit more power ? whern i do this settings my CPU VCCIO VOLTAGE, DRAM VOLTAGE and SYSTEM AGENT VOLTAGE IS PINK AND RED ? What is that mean ?

JustinThyme · ‎01-07-2019

All the cash in the world doesnt help an unlucky draw in the silicon lottery but like 80% can hit 5.0 with about half making 5.1 its that last step to 5.2 they cant handle and the extremely lucky can hit 5.3....like 4%.

Here is a nice basics guide by Der*uer. Different board and chip but whats covered here is pretty universal stuff.
https://rog.asus.com/articles/guides/video-guide-der8auer-overclocks-rog-rampage-v-edition-10/

“Two things are infinite: the universe and human stupidity, I'm not sure about the former” ~ Albert Einstein

BOB1987 · ‎01-07-2019

JustinThyme wrote:
All the cash in the world doesnt help an unlucky draw in the silicon lottery but like 80% can hit 5.0 with about half making 5.1 its that last step to 5.2 they cant handle and the extremely lucky can hit 5.3....like 4%.

Here is a nice basics guide by Der*uer. Different board and chip but whats covered here is pretty universal stuff.
https://rog.asus.com/articles/guides/video-guide-der8auer-overclocks-rog-rampage-v-edition-10/

This is for 4.GHZ
I beleive i can go max 5.2 ?

rjbarker · ‎01-10-2019

JustinThyme wrote:
All the cash in the world doesnt help an unlucky draw in the silicon lottery but like 80% can hit 5.0 with about half making 5.1 its that last step to 5.2 they cant handle and the extremely lucky can hit 5.3....like 4%.

Here is a nice basics guide by Der*uer. Different board and chip but whats covered here is pretty universal stuff.
https://rog.asus.com/articles/guides/video-guide-der8auer-overclocks-rog-rampage-v-edition-10/

The best advice Justin.....
OP..read the guide...ALL Chips are different...the same settings from one stable chip to another vary quite a bit....theres a lot of variables....(too many) to just start "copying" other BIOS settings your very likely going to be chasing your tail (and see a ton of BSOD's).....the guides will start out very simple...find some Youtube Guides with step by step instructions...for an initial 5 Ghz OC you should be able to tweek a "few" settings initially to determine how decent your Chip is.....then go from there....

Port Royal: 15,018 https://www.3dmark.com/pr/1411187

Time Spy: 22,118 https://www.3dmark.com/spy/25792262

Fire Strike Extreme: 25,542 https://www.3dmark.com/fs/26964846

x-rated · ‎01-07-2019

set them manually to same values i have on screenshots 🙂 i think we have same memory, so it should work +/- same way

BOB1987 · ‎01-07-2019

x-rated wrote:
set them manually to same values i have on screenshots 🙂 i think we have same memory, so it should work +/- same way

What about the temperature of processor ?
What temp should be ?

x-rated · ‎01-07-2019

temperature should be as low as possible and depends on program you use 🙂 in prime95 with avx enabled you will be happy if it wont go much above 100°C, but this is just extreme workload for short period of time
did you try those settings already?

BOB1987 · ‎01-07-2019

I try CINEBENCHR15.038
And when i do RUN for CPU it gives me BLUE SCREEN
...
My CPU is not STATIC on 5.0 its go from 4.7 - 5.0
I dont know what voltage i need to put.
Is it not good when its Yellow color or Purple ?

Help me to overclock my pc please