Page 4 of 5 FirstFirst ... 2 3 4 5 LastLast
Results 31 to 40 of 44
  1. #31
    ROG Member Array
    Join Date
    Jan 2019
    Reputation
    10
    Posts
    24

    I just made all changes u told me, and when i did BENCH to run CPU i got BSOD immidietly....

  2. #32
    ROG Guru: Green Belt Array Phillyflyer's Avatar
    Join Date
    Mar 2012
    Reputation
    30
    Posts
    536

    Can you put LLC to auto..for the moment....set the Vcore back to auto....leave everything else as is...reboot and run CPU-Z....
    What is the voltage showing ?

  3. #33
    ROG Member Array
    Join Date
    Jan 2019
    Reputation
    10
    Posts
    24

    I just did and when i restart my PC my PC went to BSOD.... I really dont know what to doo, and i cannot experiment anymore, dont have anymore nerves... Can u tell me is there any way someone over the skype phone help me to overclock my PC maximum and to see real power of my PC....
    Big Thanks
    Last edited by BOB1987; 01-10-2019 at 11:55 PM.

  4. #34
    ROG Guru: Orange Belt Array rjbarker PC Specs
    rjbarker PC Specs
    MotherboardMaximus XI Extreme (BIOS 0605)
    Processor9900K @ 5.1 Ghz w EK Velocity
    Memory (part number)32 GB -Dominator Platinum 3200 Mhz CAS 16
    Graphics Card #1Evga RTX 3080 FTW3 Ultra w FC EKWB
    Sound CardOnboard Realtek
    MonitorDell Alienware 34" Ultra wide 120Hz Gsync
    Storage #1Samsung 970 Pro 512G M.2 NNMe
    Storage #2Samsung 860 Pro 512G & 256G
    CPU CoolerEK Supremacy Copper w Nickel Plating
    CaseCorsair 900D
    Power SupplyCorsair AX 1600i
    OS W10 HP x64 - 20H2
    Accessory #1 480 * 360 * 240 XSPC Radiators (15 Fans) w 4 Channel 200W Fan Controller
    Accessory #2 XSPC Photon Rez / Vario Pump combo
    Accessory #3 Fesser Flex Tubing - Bits Power Fittings & EK SLi Terminal
    rjbarker's Avatar
    Join Date
    May 2013
    Reputation
    16
    Posts
    291

    Quote Originally Posted by JustinThyme View Post
    All the cash in the world doesnt help an unlucky draw in the silicon lottery but like 80% can hit 5.0 with about half making 5.1 its that last step to 5.2 they cant handle and the extremely lucky can hit 5.3....like 4%.

    Here is a nice basics guide by Der*uer. Different board and chip but whats covered here is pretty universal stuff.
    https://rog.asus.com/articles/guides...-v-edition-10/
    The best advice Justin.....
    OP..read the guide...ALL Chips are different...the same settings from one stable chip to another vary quite a bit....theres a lot of variables....(too many) to just start "copying" other BIOS settings your very likely going to be chasing your tail (and see a ton of BSOD's).....the guides will start out very simple...find some Youtube Guides with step by step instructions...for an initial 5 Ghz OC you should be able to tweek a "few" settings initially to determine how decent your Chip is.....then go from there....

  5. #35
    ROG Guru: Yellow Belt Array x-rated PC Specs
    x-rated PC Specs
    MotherboardAsus ROG Maximus XI Formula - Intel Z390
    ProcessorIntel Core i9-9900K @ 5 GHz
    Memory (part number)G.Skill Trident Z F4-3600C16D-16GTZR - 4x 8 GB, 4 GHz, 18-18-18-38
    Graphics Card #1Nvidia GeForce RTX 2080 Ti FE - 2,1/15,6 GHz
    Sound CardCreative Sound Blaster X-Fi Titanium HD
    MonitorDell UP2715K - 5120x2880, AH-IPS, 10bit
    Storage #1Sabrent Rocket - 4 TB, 3 GB/s
    CaseFractal Design Define R6 Blackout TG
    Power SupplyCorsair HX1000i - 1 KW, 83 A, 80Plus Platinum
    Keyboard Logitech G810 Orion Spectrum
    Mouse Logitech G403 Prodigy Wired
    Headset Sennheiser HD 660 S
    Mouse Pad Razer Manticor
    OS Windows 10 Pro
    Network RouterHuawei HG8245H @ 1 Gb/s FTTH GPON
    Accessory #1 EKWB Velocity + Vector
    Accessory #2 EKWB XRES 140 Revo D5 PWM + 2x CoolStream XE 360
    Accessory #3 6x Noiseblocker NB-eLoop Fan B12-PS
    x-rated's Avatar
    Join Date
    Aug 2015
    Reputation
    11
    Posts
    203

    hey, i think you should rise your vcore at least to 1,33V for LLC 7 or 1,35V for LLC 6, maybe even higher by 0,01/2
    i wrote down all my tweaks for 5 GHz AVX stable 24/7 - cpu and ram separately, everything else leave as it is, i found out that it has no impact even in the thoughest stress tests like y-cruncher and prime95

    1) so... reset bios to its defaults and set all these values for cpu only
    Code:
    CPU ONLY:
    ================
    EXTREME TWEAKER:
    SVID Behavior......................................Best-Case Scenario
    1-Core Ratio Limit.................................50
    Max CPU Cache Ratio................................50
    CPU Core/Cache Voltage.............................Adaptive Mode
    Additional Turbo Mode CPU Core Voltage.............1.350
    
    EXTREME TWEAKER -> EXTERNAL DIGI+ POWER CONTROL:
    CPU Load-line Calibration..........................Level 6
    CPU Current Capability.............................170% (or whatever is your max. value)
    save, exit and try cinebench first
    if you pass it, download latest stable prime95 http://www.mersenne.org/ftp_root/gim...94b8.win64.zip, start exe file, close it, it will create file called local.txt, open it and add this line of text on new line
    Code:
    CpuSupportsAVX=0
    save the file, start the program and run small FFTs test for at least one hour (options / torture test)
    after finishing prime95, try to play pubg at least for one hour

    2) if you pass cinebench, prime95 and pubg, continue to RAM settings in bios (add it to your cpu tweaks from above)
    Code:
    RAM ONLY:
    ================
    EXTREME TWEAKER:
    AI Overclock Tuner.................................XMP I
    DRAM Frequency.....................................DDR4-3600 MHz
    DRAM Voltage.......................................1.3500
    CPU VCCIO Voltage..................................1.25000
    CPU System Agent Voltage...........................1.25000
    
    EXTREME TWEAKER -> DRAM TIMING CONTROL:
    Maximus Tweak......................................Mode 1
    again - everything else leave as it is and dont care about purple IO and SA voltages, they are both below 1,3V
    now test again cinebench, prime95 small ffts for 1 hour and after this prime95 blend 1 hour and pubg 1 hour

    3) if you pass it, you can try to tweak memory even more - add or rewrite these settings to those from before and test again cinebench and prime95 small ffts and blend and pubg, each for at least one hour
    Code:
    ADDITIONAL RAM TWEAKS:
    ================
    EXTREME TWEAKER:
    DRAM Frequency.....................................DDR4-4266 MHz
    DRAM Voltage.......................................1.4000
    
    EXTREME TWEAKER -> DRAM TIMING CONTROL:
    DRAM CAS# Latency..................................19
    DRAM RAS# to CAS# Delay............................19
    DRAM RAS# ACT Time.................................39
    good luck

    btw as far i know pubg utilizes avx instructions so you have to be 100% stable even in avx
    you can also run y-cruncher benchmark which utilizes avx2 instructions, but prepare for extreme temperatures http://www.numberworld.org/y-crunche...0.7.7.9493.zip
    open kurumi file and enter 0, 1, 8 settings (close all apps before and watch temperatures in hw monitor)
    Last edited by x-rated; 01-11-2019 at 01:04 AM.

  6. #36
    ROG Member Array
    Join Date
    Jan 2019
    Reputation
    10
    Posts
    24

    I WILL DO THAT AND TELL U WHATS HAPPEND! thanks! BIG THANKS!

  7. #37
    ROG Guru: Orange Belt Array rjbarker PC Specs
    rjbarker PC Specs
    MotherboardMaximus XI Extreme (BIOS 0605)
    Processor9900K @ 5.1 Ghz w EK Velocity
    Memory (part number)32 GB -Dominator Platinum 3200 Mhz CAS 16
    Graphics Card #1Evga RTX 3080 FTW3 Ultra w FC EKWB
    Sound CardOnboard Realtek
    MonitorDell Alienware 34" Ultra wide 120Hz Gsync
    Storage #1Samsung 970 Pro 512G M.2 NNMe
    Storage #2Samsung 860 Pro 512G & 256G
    CPU CoolerEK Supremacy Copper w Nickel Plating
    CaseCorsair 900D
    Power SupplyCorsair AX 1600i
    OS W10 HP x64 - 20H2
    Accessory #1 480 * 360 * 240 XSPC Radiators (15 Fans) w 4 Channel 200W Fan Controller
    Accessory #2 XSPC Photon Rez / Vario Pump combo
    Accessory #3 Fesser Flex Tubing - Bits Power Fittings & EK SLi Terminal
    rjbarker's Avatar
    Join Date
    May 2013
    Reputation
    16
    Posts
    291

    ^^^^ Good stuff there X Rated

  8. #38
    ROG Member Array
    Join Date
    Jan 2019
    Reputation
    10
    Posts
    24

    Quote Originally Posted by x-rated View Post
    hey, i think you should rise your vcore at least to 1,33V for LLC 7 or 1,35V for LLC 6, maybe even higher by 0,01/2
    i wrote down all my tweaks for 5 GHz AVX stable 24/7 - cpu and ram separately, everything else leave as it is, i found out that it has no impact even in the thoughest stress tests like y-cruncher and prime95

    1) so... reset bios to its defaults and set all these values for cpu only
    Code:
    CPU ONLY:
    ================
    EXTREME TWEAKER:
    SVID Behavior......................................Best-Case Scenario
    1-Core Ratio Limit.................................50
    Max CPU Cache Ratio................................50
    CPU Core/Cache Voltage.............................Adaptive Mode
    Additional Turbo Mode CPU Core Voltage.............1.350
    
    EXTREME TWEAKER -> EXTERNAL DIGI+ POWER CONTROL:
    CPU Load-line Calibration..........................Level 6
    CPU Current Capability.............................170% (or whatever is your max. value)
    save, exit and try cinebench first
    if you pass it, download latest stable prime95 http://www.mersenne.org/ftp_root/gim...94b8.win64.zip, start exe file, close it, it will create file called local.txt, open it and add this line of text on new line
    Code:
    CpuSupportsAVX=0
    save the file, start the program and run small FFTs test for at least one hour (options / torture test)
    after finishing prime95, try to play pubg at least for one hour

    2) if you pass cinebench, prime95 and pubg, continue to RAM settings in bios (add it to your cpu tweaks from above)
    Code:
    RAM ONLY:
    ================
    EXTREME TWEAKER:
    AI Overclock Tuner.................................XMP I
    DRAM Frequency.....................................DDR4-3600 MHz
    DRAM Voltage.......................................1.3500
    CPU VCCIO Voltage..................................1.25000
    CPU System Agent Voltage...........................1.25000
    
    EXTREME TWEAKER -> DRAM TIMING CONTROL:
    Maximus Tweak......................................Mode 1
    again - everything else leave as it is and dont care about purple IO and SA voltages, they are both below 1,3V
    now test again cinebench, prime95 small ffts for 1 hour and after this prime95 blend 1 hour and pubg 1 hour

    3) if you pass it, you can try to tweak memory even more - add or rewrite these settings to those from before and test again cinebench and prime95 small ffts and blend and pubg, each for at least one hour
    Code:
    ADDITIONAL RAM TWEAKS:
    ================
    EXTREME TWEAKER:
    DRAM Frequency.....................................DDR4-4266 MHz
    DRAM Voltage.......................................1.4000
    
    EXTREME TWEAKER -> DRAM TIMING CONTROL:
    DRAM CAS# Latency..................................19
    DRAM RAS# to CAS# Delay............................19
    DRAM RAS# ACT Time.................................39
    good luck

    btw as far i know pubg utilizes avx instructions so you have to be 100% stable even in avx
    you can also run y-cruncher benchmark which utilizes avx2 instructions, but prepare for extreme temperatures http://www.numberworld.org/y-crunche...0.7.7.9493.zip
    open kurumi file and enter 0, 1, 8 settings (close all apps before and watch temperatures in hw monitor)
    Click image for larger version. 

Name:	CBN 1.jpg 
Views:	5 
Size:	406.1 KB 
ID:	78245
    I just passed CBN without crashing PC- During this test my CPU was 90- 90 C
    Afther that i downloaded PRIME 95 and i did testing u told me, after 2 mints of testing my CPU went to 100C and pc was BSOD...
    BTW do i need to put Sync all cores ? or u want me to just do one core on 50 and rest on default ? :S
    (((( ?
    I even try this guide from youtube and nothing same thing happends when i do bench....
    Click image for larger version. 

Name:	CBN2.jpg 
Views:	1 
Size:	385.9 KB 
ID:	78246
    I dont know what to DOO....
    Thanks everybody here who try to help.
    Last edited by BOB1987; 01-16-2019 at 04:40 AM. Reason: Forgot to put additional words

  9. #39
    ROG Guru: Yellow Belt Array x-rated PC Specs
    x-rated PC Specs
    MotherboardAsus ROG Maximus XI Formula - Intel Z390
    ProcessorIntel Core i9-9900K @ 5 GHz
    Memory (part number)G.Skill Trident Z F4-3600C16D-16GTZR - 4x 8 GB, 4 GHz, 18-18-18-38
    Graphics Card #1Nvidia GeForce RTX 2080 Ti FE - 2,1/15,6 GHz
    Sound CardCreative Sound Blaster X-Fi Titanium HD
    MonitorDell UP2715K - 5120x2880, AH-IPS, 10bit
    Storage #1Sabrent Rocket - 4 TB, 3 GB/s
    CaseFractal Design Define R6 Blackout TG
    Power SupplyCorsair HX1000i - 1 KW, 83 A, 80Plus Platinum
    Keyboard Logitech G810 Orion Spectrum
    Mouse Logitech G403 Prodigy Wired
    Headset Sennheiser HD 660 S
    Mouse Pad Razer Manticor
    OS Windows 10 Pro
    Network RouterHuawei HG8245H @ 1 Gb/s FTTH GPON
    Accessory #1 EKWB Velocity + Vector
    Accessory #2 EKWB XRES 140 Revo D5 PWM + 2x CoolStream XE 360
    Accessory #3 6x Noiseblocker NB-eLoop Fan B12-PS
    x-rated's Avatar
    Join Date
    Aug 2015
    Reputation
    11
    Posts
    203

    did you set CpuSupportsAVX=0 in local.txt?
    sync all cores is default value i think, so leave it as it is

  10. #40
    ROG Member Array
    Join Date
    Jan 2019
    Reputation
    10
    Posts
    24

    Quote Originally Posted by x-rated View Post
    did you set CpuSupportsAVX=0 in local.txt?
    sync all cores is default value i think, so leave it as it is
    I did everything u wrote. As i say BSOD afther 2 mints of prime95
    and bench passed with 95+ C cpu....
    I should have atleaste 75-80 C with this water cooling i have...
    And this was for CPU only, i didnt change ram bcs u told me if i pass CPU with prime then to do ram, but i didnt passit
    Last edited by BOB1987; 01-16-2019 at 03:35 PM.

Page 4 of 5 FirstFirst ... 2 3 4 5 LastLast

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •