01-08-2019 03:50 PM - last edited on 03-06-2024 09:00 PM by ROGBot
01-08-2019 05:30 PM
01-08-2019 07:13 PM
LeChat wrote:
I know you have to enable the dimm.2 in the BIOS, it is disabled by default. Also remember that your GPU will become x8 instead of x16, should not see much of a difference.
Cheers!
K
01-08-2019 05:37 PM
01-08-2019 07:15 PM
squawker wrote:
Hi vinnycenzo,
Looking at Gene XI manual, it's stated that all M.2 sockets are only for NVMe SSD's, that is, not for SATA devices.
Saying it in another way, your 3 WD Green 240 are SATA SSD's, and will not be recognized when put in sockets M.2_1, M.2_2, DIMM.2_1 / 2.
Perhaps you can change the 3 WD Green M.2 ssd's for the type with SATA physical connectors, to plug in the SATA6G_1 > SATA6G_4 connectors from motherboard.
[]'s
01-08-2019 09:17 PM