01-09-2019 12:34 AM - last edited 3 weeks ago by ROGBot
01-09-2019 01:20 AM
01-09-2019 01:44 AM
MasterC@ASUS wrote:
The online manual is here:
https://dlcdnets.asus.com/pub/ASUS/mb/accessory/ROG_Aura_Terminal/Q13951_ROG_AURA_TERMINAL_QSG_WEB.p...
There is a header on the Z370-E for addressable LED strips only, not the ROG Terminal. Connect all lighting strips (up to 4) to the ROG Terminal.
The ROG Terminal can be installed inside or outside of your chassis, whichever the case may be - it requires power and data for Aura Sync and Halo to work (just power for built-in light effects).
For power, you can connect either the bundled power adapter or MOLEX connector to DC IN.
For data, connect to the micro-USB port on the ROG Terminal - any of your USB ports or a USB 2.0 connector on your Z370-E.
Out of curiosity, which graphics card are you running?
01-09-2019 01:58 AM
01-09-2019 04:06 AM
MasterC@ASUS wrote:
If all the lights are working then power is fine. Halo should detect the Terminal when connected via USB...
Strix RTX 2080, nice!
01-10-2019 11:02 AM
01-10-2019 06:18 PM