ROG Armoury II V3.00.16 [Report any issues here]

[drop4205]

strix flare and gladius2. Once system shut down if I tap key or move mouse the leds light up and stay on on the keyboard and mouse. I have to restart computer and then shut down for them to go out again. Any ideas

[JimmyH]

So I have just done a few days of testing and have confirmed my results.

Strix Z370E - AURA works fine

ROG Pugio and Strix Fusion 500 - Armoury loses sync if shut down. You have to start Armoury each time choose another option, then select your option again.

[HausofLandau]

Same here. The state of the ASUS software is utterly embarrassing, making me regret getting so much within their ecosystem.
It's embarrassing that I have to choose between being able to easily customize my keyboard and mouse functionality and being able to have their RGB sync, let alone sync with the other RGB items connectted through my motherboards headers and RAM. Your software is stuck in the 90s and needs to be seriuosly upgraded.

Very disappointed with AURA and Armoury, two totally different lighting programs and if you add Fusion Headsets to the mix, it's different again. I am now just researching AUROS from Gigabyte, they seem to have their stuff organised.

[Gofran]

rog gladius 2 wireless has an issue when turning on pc it is begin with second dpi so i need to click on dpi button to get it back on the first

[dizeles95]

Hi!

My specs:

- Armoury II 3.00.22 - Reinstalled few times
- Rog pheripherals :
Fusion 500(USB FW: 0040, DSP FW: 0015, MCU FW: 0020)
Claymore(HUN layout, Firmware: "80% Firmware version": 1.09.01, Keypad firmware: 1.03.00)
Spatha (Wireless mode, Firmware: (I see only the dock's firmware version: 1.00, but I connected it with wire and then i see its FW: 1.72)
- Intel I3-8350k
- Asus Prime Z370-A
- GTX 1060 6GB Strix OC
- 2 x 8 GB Hyperx Fury 2400MHZ
- 500GB Sandisk Ultra SSD (Armory II there)
- 1TB WD Blue HDD
- Windows 10 Pro 1809

Issues:
- When I try to see my spatha's firmware version in wireless mode i see only the docks fw. version. <- (after wired fw update to 1.72 this was fixed)
- When my pc is off and I lift spatha from dock and put it back, it starts to lightning.
later i start the pc and mouse not working, put it back on dock again, and off, and then working. <- (after wired fw update to 1.72 this was fixed)
- When spatha connected to dock Armoury II dont see it.
- When I reinstall Armoury II : Claymore, Spatha, Fusion profiles lost the names and linkings(sometimes the customised lightning to) (Why dont have option to export/import profiles when this software unstable from years to years???????????????(OMG this is a top brand, learn from Logitech G some software development))
- When I try to set Spatha lightning syncronized/not syncronized color cycle i see only the "Customise pattern", the "Default pattern" is missing. (screenshot attached)

[blind1337nedm]

Still Can't Update due to a catastrophic failure.

[Nadzran]

Changing any settings in ROG Armoury for my headset does not do anything

[Fastback85]

Still Can't Update due to a catastrophic failure.

Same issue here. I'm still on Armoury 3.00.16 and can't update due the error.

[3dw4rdTm]

ROG ARMOURY 3.00.26 + ROG FORMULA X + ASUS CLAYMORE = Impossibility to access BIOS pressing DEL or F2 During post. Its needed uninstall Armoury software.

Critic failure...

[danfab]

I have a problem with Armoury 3.00.22, when the PC starts, sometimes it appears the error message in attachment and armoury closes without the possibility to restart it

1. PC
2. Aura Sync products: Asus Maximus X Hero latest Bios, Asus Strix 1070 O8G, Asus ROG Gladius II latest firmware
3. 3rd-party peripheral, audio, or lighting software: Corsair Link 4.9.9.3, Logitech G Hub
4. Wired connection
5. Reinstalled Armoury II? YES
6. Reinstalled Windows? NO
7. WIndows version & build 1809 BUILD 17763.437
8. Previous version of firmware or software that worked as expected: ALWAYS HAD THIS PROBLEM SINCE I BOUGHT THE MOUSE