Page 39 of 43 FirstFirst ... 29 37 38 39 40 41 ... LastLast
Results 381 to 390 of 427
  1. #381
    New ROGer Array
    Join Date
    Feb 2020
    Reputation
    10
    Posts
    1

    Aura Sync

    Quote Originally Posted by Audicted View Post
    Hello everyone,

    Last week, I've built a desktop PC with the following specs:

    Asus Z390 E-GAMING Mobo
    Intel i7 9700K
    XPG S40G SPECTRIX 512 GB SSD which advertised as a 3500 read / 3000 write SSD. no other storage unit is installed on the machine, so this is my OS drive naturally.
    Windows 10 Pro x64 Bit

    I noticed that my MSI GS65 laptop was faster than my desktop in some tasks, when used side by side with the desktop, which felt slow and sluggish for a pc equipped with a 3500/3000 ssd. So i decided to run some benches on the Desktop.

    That's when i saw that my S40G was running at 1000 / 650 speeds. Tried with a bunch of disk benchmark softwares, including Crystal Disk Mark. After a vast investigation, i found that Asus Aura (1.0.7.71) and Asus Armoury Crate is the problem. Whenever i install one of these softwares, S40G's performance dips down to very low values. I uninstall the software, it goes back to 3500 / 2400 values. Since this is a RGB SSD, i'm now certain that Asus Aura (or Armoury Crate) RGB control drivers are causing a conflict with the drive's normal operation. But this only happens when S40G is the OS drive. If i uncheck it from the peripherals list on Aura, drive goes back to normal speeds.

    Can be seen here: https://ibb.co/mvg7tK9

    I tried plugging the SSD on to 2 different m.2 sockets (m.2_1 / m.2_2), and tried it on 2 different z390 e gaming motherboards. Both gave me the same results.

    This is the original thread here:
    https://forums.tomshardware.com/thre...#post-21385070

    i do not use neither Aura nor Armoury Crate at the moment, since dipping from 3500 to 1000 MB/s is a major issue, and needs to be addressed. I also ordered a XPG SX8200 PRO, and when it arrives, I'm gonna make it my OS drive, and check the S40G again with the Aura / Armoury Crate.
    Can you Solved the problem? I have the same problem with my s40g spectrix...

  2. #382
    New ROGer Array
    Join Date
    Feb 2020
    Reputation
    10
    Posts
    5

    https://rog.asus.com/forum/showthrea...nd-motherboard


    1. The BIOS/firmware version for your hardware.

    2401

    2. The AURA SYNC products you own and any other 3rd-party lighting software.

    Z370-F Rog MotherBoard,
    ML240L RGB CoolerMaster WaterCooler
    GSKILL 3200MhZ RGB 2x 8gb DDR4 Memories.
    EVGA GTX 1070 SC 2 (EVGA EX PRECISION OC Software)
    Corsair K68 Keyboard RGB (iCue Software)
    Corsair VOID 7.1 RGB (iCue Software)



    3. If a power cycle has made any difference. (Shutdown, power off, unplug power cable for a minute)

    https://www.youtube.com/watch?v=VvKH38DuOfs

    4. If you have tried reinstalling Aura or Windows already.

    Both of them had just been reinstalled.

    5. Do you have Aura for Graphics Cards installed also. (Please uninstall)

    No, my Graphic Card doesnt support aura.

    6. Windows Edition, Version, and OS build.

    Windows 64Bits HOME

    7. If the same issue was present in the previous version(s).

    No, but i areadly tryed to install all versions of aura.

    8. State clearly the issue(s) you are experiencing.

    Hello, i used to get aura working since i bought my computer and installed it. (Jan 2019) But after i updated to the latest version of aura in december 2019, after 2 days installed, my Motherboard and Water cooler (specified on topic "2.") stopped working led lightning. they are totally shut down at the moment. I areadly re installed aura for 1 month everyday trying to get the solution, and this month i decided to reinstall windows. After reinstalling system, only my memories RGB are working with aura. My mother board and watercooler still with led Shutdown.

    i areadly gone on BIOS page and turn off and on the configurations on advanced mode> onboard device settings. And it hasnt worked.

    When i pop my computer font (RM 750X Golden Plus CORSAIR) on, my motherboard does a blue light flash on RGB light area, as you can see in the video: https://www.youtube.com/watch?v=VvKH38DuOfs

    I dont know what else to do anymore.

    i had read the iCue-Aura new system and i downloaded it. But when i try to pop lights on, into the iCUE software, it still doesnt work.

    Pics:

    https://i.imgur.com/OGSJTCG.png
    Please Include a screenshot of the Aura UI, and any other pictures if applicable.
    Last edited by WorstworldTV; 03-08-2020 at 02:40 PM.

  3. #383
    ROG Member Array
    Join Date
    Aug 2016
    Reputation
    10
    Posts
    15

    Installed it and totally f..d up my system,my maximus viii formula board didn't light up and I couldn't unmount external usb devies.
    Guys from Asus need to resolve this asap...

  4. #384
    New ROGer Array revealed PC Specs
    revealed PC Specs
    MotherboardROG STRIX Z390-F Gaming
    ProcessorIntel Core i9 9900 k
    Memory (part number)4x G.Skill Trident Z RGB 3200 Mhz (F4-3200C16-8GTZR) = 32 GB
    Graphics Card #1msi Geforce GTX 1070 Gaming Z 8G
    Sound CardOnboard
    Monitor2x Omen by HP 27 Display (gsync)
    Storage #1NVMe 970 Evo Plus 500 GB
    Storage #2NVMe 970 Evo Plus 500 GB
    CPU CoolerAsetek 570LXL 240 M
    CasePhanteks Enthoo Evolv X (RGB, tempered glas)
    Power Supply650 Watt be quiet! Dark Power Pro 11 Modular 80+ Platinum
    Keyboard Roccat Horde AIMO
    Mouse Logitech G502
    Headset Logitech G430
    Mouse Pad Sharkoon Fireglider Gaming
    Headset/Speakers Logitech Z623
    OS Windows 10
    Network RouterAVM
    Accessory #1 Lian Li Strimer RGB cable 24 Pin 20 cm
    Accessory #2 GMX RL-300 Rainbow RGB Fans, Set of 3 pcs. 120 mm
    Accessory #3 Phantecs PCI-E riser for vertical GPU mount.
    revealed's Avatar
    Join Date
    Mar 2019
    Reputation
    10
    Posts
    35

    - Saved patterns of aura creator do not get picked up in Armoury crate.
    - Aura creator is somehow recognized by the nvidia geforce expirience overlay. Should be excluded?
    - Aura creator lights shut the whole RGB off until you close the application once you hit the play button to test your layer.

  5. #385
    New ROGer Array armax PC Specs
    armax PC Specs
    MotherboardASUS Z390-F
    ProcessorIntel 9600k
    Memory (part number)Corsair 16GB(2x8) D4 3200M RGB CMW16GX4M2C3200C16W
    Graphics Card #1ASUS ROG STRIX RTX 2060 OC
    MonitorASUS 24" VG248QE 1ms 144Hz
    Storage #1Samsung 970 Evo 512 GB
    CPU CoolerCorsair H100i GTX
    CaseCorsair iCUE 465x
    Power SupplyCorsair RM750x
    Keyboard Logitech G213
    Mouse CM MM530
    Mouse Pad steelseries cs:go
    OS Win_10 64bit

    Join Date
    Mar 2020
    Reputation
    10
    Posts
    4

    Aura version is Lighting_Control_1.07.79


    1. The BIOS/firmware version for your hardware.
    Z390-F Bios: 1401

    2. The AURA SYNC products you own and any other 3rd-party lighting software.
    Corsair LL120 Fans, H100i GTx, Logitech G213, CM MM510

    3. If a power cycle has made any difference. (Shutdown, power off, unplug power cable for a minute)

    4. If you have tried reinstalling Aura or Windows already.
    Many times

    5. Do you have Aura for Graphics Cards installed also. (Please uninstall)
    I did

    6. Windows Edition, Version, and OS build.
    Win 10 64bit 1909

    7. If the same issue was present in the previous version(s).
    Already tried Lighting_Control_1.06.17 / this one have" please connect an aura sync compatible device and hit the refresh button" problem.

    8. State clearly the issue(s) you are experiencing.


    Click image for larger version. 

Name:	Screenshot_1.jpg 
Views:	0 
Size:	19.8 KB 
ID:	84437
    Last edited by armax; 04-01-2020 at 10:12 AM.

  6. #386
    ROG Junior Member Array
    Join Date
    Dec 2015
    Reputation
    10
    Posts
    3

    Thumbs up updated bios now only 1 ram stick works

    1. The BIOS/firmware version for your hardware.
    updated from 0420 to 1405
    2. The AURA SYNC products you own and any other 3rd-party lighting software.
    rog strix x570 -f gaming, tident gskill rgb memory, 3rd party rgb led fan.
    3. If a power cycle has made any difference. (Shutdown, power off, unplug power cable for a minute)
    no changes
    4. If you have tried reinstalling Aura or Windows already.
    yes had aura installed and both ram sticks workd but mobo was never detected. updated bios because it was having problems recovering from sleep. now only 1 ram stick works. un and reinstalled aura sink twice then uninstalled it and installed armory crate. no change
    5. Do you have Aura for Graphics Cards installed also. (Please uninstall)
    no
    6. Windows Edition, Version, and OS build.
    windows 10. all updates applied

    7. If the same issue was present in the previous version(s).
    yes/no
    8. State clearly the issue(s) you are experiencing.
    Please Include a screenshot of the Aura UI, and any other pictures if applicable
    when i first installed the the rgb ram and board worked. after installed aura the board rgb quit unless it was in power down or sleep. the system had a hard time recovering from sleep. after checking and seeing the bios was older then what was available on the drivers page i updated to the latest. now only 1 stick of ram works.
    Miniatura de Adjuntos Miniatura de Adjuntos 20200405_123001.jpg  

    20200405_122955.jpg  


  7. #387
    ROG Guru: Green Belt Array hexaae PC Specs
    hexaae PC Specs
    Laptop (Model)ASUS Gaming Laptop GL703GS
    MotherboardIntel HM370 Cannon Lake-H
    Processori7-8750H
    Memory (part number)32GB DDR4 @2666MHz (dual-channel)
    Graphics Card #1NVidia GTX 1070 8GB
    Monitor1080p 144Hz 17" G-Sync AUO B173HAN03.2
    Storage #11TB SSD Crucial MX300
    Storage #2NVMe Samsung PM916
    Mouse ROG Strix Carry Wireless-BT mouse
    Mouse Pad MouseRug collection
    Headset/Speakers Realtek HD (ALC295)
    OS Windows 10 PRO x64
    Accessory #1 XBox One Bluetooth gamepad
    Accessory #2 Hori Fighting Stick Mini
    Accessory #3 4K Blu-Ray UHD USB Archgon Star
    hexaae's Avatar
    Join Date
    Feb 2015
    Reputation
    27
    Posts
    647

    Seriously: AURA software is so buggy and unreliable that in my opinion is NEVER worth the upgrade, if the original pre-installed version was working fine.

  8. #388
    ROG Guru: White Belt Array
    Join Date
    Jan 2018
    Reputation
    10
    Posts
    94

    I cannot find the Aura Sync software anywhere. The link where it was hosted seems to be dead. Is it no longer supported? I have a Crosshair VI Extreme motherboard, Wraith Max CPU cooler, and three Thermaltake RGB fans. What is the latest version of Aura Sync? Is it 1.07.55?

  9. #389
    ROG Enthusiast Array TheEternaL PC Specs
    TheEternaL PC Specs
    MotherboardAsus ROG Rampage V Edition 10
    ProcessorIntel Core i7-5930K
    Memory (part number)32GB HyperX Predator 8x4GB 2133Mhz
    Graphics Card #1Asus ROG Strix GTX 1080 Ti
    MonitorSamsung Odyssey G7
    Storage #2M.2 SSD Samsung 970 Pro 512GB
    CPU CoolerCostum EK Water Cooling
    CasePhanteks Enthoo Evolv X
    Power SupplyNext Buy Asus ROG Thor 850 Watt
    Keyboard Asus ROG Strix Flare
    Mouse Asus ROG Gladius II
    Headset Asus ROG Delta
    Mouse Pad Next Buy Asus ROG Balteus
    Headset/Speakers Next Buy Asus ROG Magnus
    Accessory #2 Asus ROG Aura Terminal
    Accessory #3 Speakers Edifier 2730DB
    TheEternaL's Avatar
    Join Date
    Dec 2016
    Reputation
    11
    Posts
    65

    Quote Originally Posted by Riekopo View Post
    I cannot find the Aura Sync software anywhere. The link where it was hosted seems to be dead. Is it no longer supported? I have a Crosshair VI Extreme motherboard, Wraith Max CPU cooler, and three Thermaltake RGB fans. What is the latest version of Aura Sync? Is it 1.07.55?
    Aura Sync 1.07.79 : https://www.asus.com/campaign/aura/us/download.php
    Last edited by TheEternaL; 04-11-2020 at 09:44 AM.

  10. #390
    ROG Guru: White Belt Array
    Join Date
    Jan 2018
    Reputation
    10
    Posts
    94

    Just installed Aura Sync 1.07.55 from a post someone made for my motherboard. And my motherboard isn't showing up in the program. So great...

    Do I have to use the buggy Aura software? Can the lighting be controlled completely from the BIOS instead?
    Last edited by Riekopo; 04-12-2020 at 04:42 PM.

Page 39 of 43 FirstFirst ... 29 37 38 39 40 41 ... LastLast

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •