AURA SYNC 1.07.35 [Report any issues here]

[bleibach]

Same for me, tested on 2 PCS, and it regularly gives the error in Windows 10 that it stopped working. Also colors seem to reset after each reboot.

i have exactly the same Problem

[sbaecker]

Here is my issue.

If you need to report any issues after installing 1.07.35, please remember to mention the following to make debugging faster:

1. The BIOS/firmware version for your hardware.
2203
2. The AURA SYNC products you own and any other 3rd-party lighting software.
ROG Crosshair VII Hero WiFi
iCUE (version 3.14.104) for Vengeance RGB RAM & Corsair - LL140 RGB LED fans.
3. If a power cycle has made any difference. (Shutdown, power off, unplug power cable for a minute)
No - done all 3
4. If you have tried reinstalling Aura or Windows already.
No to either
5. Do you have Aura for Graphics Cards installed also. (Please uninstall)
No
6. Windows Edition, Version, and OS build.
Windows 10 Pro 1709
7. If the same issue was present in the previous version(s).
First version I've tried, new mobo
8. State clearly the issue(s) you are experiencing.
"ASUS AURA has stopped working. Checking for a solution to the problem."
Please Include a screenshot of the Aura UI, and any other pictures if applicable.

[Rufinoman]

AURA Sync is now at version 1.07.57 and the problems described in this thread don't appear to have been resolved in this latest release, at least not for me.
I really think it's appalling that ASUS has NOT communicated to us, that they are addressing the software problem.
As it stands, AURA Sync is practically useless.

[repyev]

I have a motherboard PRIMEX 299-DELUXE II
memory Kingston HyperX KHX2933C15D4/8GX the problem governance backlight a similar as here
https://youtu.be/-sEnCqagZ2s
Program version 1.07.57

[Raphael Mustang]

I don't know if I can report this problem like this or not but I had this problem since forever and I made topics for it, but never got any help any support or any replay from anyone in asus, almost like they know it exist, but they don't care at all!
https://rog.asus.com/forum/showthrea...473#post767473

honestly I don't know why I paid for RGB made by Asus, their support is terrible, worst support ever.

[sbaecker]

I don't know if I can report this problem like this or not but I had this problem since forever and I made topics for it, but never got any help any support or any replay from anyone in asus, almost like they know it exist, but they don't care at all!
https://rog.asus.com/forum/showthrea...473#post767473

honestly I don't know why I paid for RGB made by Asus, their support is terrible, worst support ever.

I probably won't be buying ASUS next time around... the software they provide is terrible. If Corsair made mobo's I'd buy. Might try ASRock next go around.

[Raphael Mustang]

I probably won't be buying ASUS next time around... the software they provide is terrible. If Corsair made mobo's I'd buy. Might try ASRock next go around.

I agree on Corsair their software is amazing, never had any major issue with them and their customer support is awesome, I just sent them my mouse and keyboard for RMA and not only they were nice in emails, but also they agreed and paid the shipping cost.

[razorback85]

Same old problem. I've tried install windows 10 pro again in a whole new drive. Aura 1.07.57 give me the same problem. My RGB on the I/O shield is still dead light! no respond. When tried to calibrate RGB header, it shows over 50 headers when actually there is only two header found in the motherboard. Why can't asus fix this? every new release version doesn't fix it.

[DMAN999]

I have an ROG Strix B450-F Gaming (BIOS 1201) and my Aura also stopped working so I tried versions 1.0.7.22 (that came with my MB), 1.0.7.36, 1.0.7.51, 1.0.7.55 and 1.0.7.57.
None of them worked properly.
I googled the issue and found a reddit post saying that version 1.05.12 or 1.05.22 might work.
So I hunted down a copy of 1.05.12 (someone posted a link to it on their Google Drive) and it does work again with my G.Skill TridentZ RGB, my MB RGBs and with the 4 RGB strips I have plugged into the RGB headers.
This is the copy I used:
https://drive.google.com/open?id=1Qr...d2qKeiUlEuRtLt


UPdate:
I got version 1.07.22 working again by using fileunsigner to unsign every .exe in the installer package and then all the .exe files in the installation folder (Asus\Aura and its subfolders) and all .exes in the AXSp folder.
https://www.fluxbytes.com/software-r...unsigner-v1-0/
(be sure to set it to run as administrator before dropping the .exes on it.

[Rx4speed]

Aura has tripped the Easy-Anti Cheat detection on Fortnite, and I assume other games that use EAC for what, the last 4 Aura driver releases? When the hell will this be fixed? I bought my 1st ASUS board in a very long time, the crosshair vii hero, and while the board itself is amazing, ASUS software may be the worst I've used since 1997. Looks like it will be at least a decade before I buy another.