AURA SYNC 1.07.35 [Report any issues here]

[VitaTrum]

I installed latest AURA SYNC on my laptop GL702VSK but i get this error as usual (what a surprise with asus software )



First installation ever. Any idea?

PS: but asus dev, are drunks or what? Is not possible to have an issue every time with them software, goddamn. Most probably a child get a code much better than you. Unbelievable

[liakou]

I installed latest AURA SYNC on my laptop GL702VSK but i get this error as usual (what a surprise with asus software )



First installation ever. Any idea?

PS: but asus dev, are drunks or what? Is not possible to have an issue every time with them software, goddamn. Most probably a child get a code much better than you. Unbelievable

Uninstall and then install version 1.06.17.
https://dlcdnets.asus.com/pub/ASUS/m...096.1560001925

[VitaTrum]

Uninstall and then install version 1.06.17.
https://dlcdnets.asus.com/pub/ASUS/m...096.1560001925

Much much better i see
Works flawlessly





(i'm ironic obviously)

[DarthLoloX]

I didn't find a solution either, I lost any hope now.

[Japion]

Latest and any other version won't detect any devices ;/ or they simply won't open and say ''asusservice is unavailabe''

But AURA for graphics card does ;(

[Rufinoman]

Fixed!
In the end, I went through the whole uninstall procedure with Revo and CCleaner and installed version 1.06.17.
Following the zip extraction, I ran the two apps in the AXSP folder, then installed Aura and I was able to get my motherboard recognised but not the GPU.
A few days later and on an unrelated issue, I reset the mobo BIOS by removing the battery and I also removed the GPU, leaving the PC for a few minutes for a cup of tea.
I then put everything back together, rebooted, ran Aura and my GPU is now available. perhaps clearing the BIOs did the trick, but I can't be sure.

[DarthLoloX]

Fixed!
In the end, I went through the whole uninstall procedure with Revo and CCleaner and installed version 1.06.17.
Following the zip extraction, I ran the two apps in the AXSP folder, then installed Aura and I was able to get my motherboard recognised but not the GPU.
A few days later and on an unrelated issue, I reset the mobo BIOS by removing the battery and I also removed the GPU, leaving the PC for a few minutes for a cup of tea.
I then put everything back together, rebooted, ran Aura and my GPU is now available. perhaps clearing the BIOs did the trick, but I can't be sure.

Good for you, but the idea is to use the last version with the updated list of compatible hardware and features.

[Rufinoman]

Good for you, but the idea is to use the last version with the updated list of compatible hardware and features.

Of course, the idea is to use the latest version, but as far as I'm concerned, the secret for me was the effect of resetting the BIOS and removing the GPU for a time.
Black magic or not, it's worth a try and it worked for me so that I don't have to waste my time on Asus's broken software.
Try it yourself.

[AthelstanRenir]

1. The BIOS/firmware version for your hardware.
0224
2. The AURA SYNC products you own and any other 3rd-party lighting software.
ROG STRIX Z390-F / CoolerMaster MA610P
3. If a power cycle has made any difference. (Shutdown, power off, unplug power cable for a minute)
no
4. If you have tried reinstalling Aura or Windows already.
yes
5. Do you have Aura for Graphics Cards installed also. (Please uninstall)
no
6. Windows Edition, Version, and OS build.
Windows 10 Home x 64 1903 Build 18362.295
7. If the same issue was present in the previous version(s).
yes
8. State clearly the issue(s) you are experiencing.
Z390-F logo Aura is not working, but my CoolerMaster MA610P is lit up.
In the Photo, it might look like it was lit up, but actually not.

hope to hear any feedback soon

[Rufinoman]

Here's a handy article on to fix Aura.

How To Fix Asus Aura Sync