AURA SYNC 1.07.35 [Report any issues here]

[mgoodall]

I could finally make it work with this step by step BUT I had to install version 1.06.17
Also I must clarify that if I want to make use of this version without having the AuraSync Service issue again, I cannot install LiveDash (Which REALLY REALLY S*CKS).

This unfortunately doesn't work for me.. along with the other dozen uninstall/registry clean procedures I've tried.

[Zeroed85]

I have one of the new ROG Swift PG349Q ultrawide's with an Aura sync-able ROG logo at the back that works over USB from the monitor. The monitor shows as Display in the Aura software but the connection is constantly being lost. I'm forced to terminate the Lighting service from Task Manager and re-open Aura. When I re-open Aura all of the previous lighting effects including the stored sync at shutdown effects are reset to default and I have to click the add Display button to reconnect the ROG display again. I think waking the machine from sleep can cause the disconnection but otherwise it appears to just happen randomly.

[yukiphoenix]

Okay so while AURA has always been buggy, it did at least run on my system until now. The day before yesterday, MS released three updates, one of which was a security update to mitigate a RAD loophole found by Russian hackers, so I'd say it's a very important update. But after installing all three updates, which I'll provide a screenshot of, AURA stopped working immediately. I noticed because my DRAM was blinking orange. I tried launching it but got the error "your administrator has blocked this program."

This was strange seeing as I'm the admin of my system and my network. So I did what anyone with experience would do. I wiped all traces of AURA and installed the latest version. But now it just crashes with a general error saying "AURA.exe closed unexpectedly." Restarting the "lightingcontrol" service does nothing. I troubleshooted for about an hour and a half but NOTHING I do will get it running now, on a system where it ran perfectly before. The only thing I haven't done is uninstalling the updates, because I don't feel that is a solution I can live with.

So far, I have yet to hear if others are having this same issue. I really need to find out if this is isolated, because if it is, I will continue to troubleshoot because I'll know it's a bug related to what's on my own system and not a bug in the code of AURA or Windows updates. Perhaps AURA needs updated for the new security update, which I read did affect how windows interacts with services. This needs to be checked. Here are the updates that broke AURA for me.

I tried to create a thread about this but I kept getting the "access denied" error. So all I can do is post it here.

Attachment 80992

I got same situation with X570-F
before I read this discussion, I thought it is a hardware failure
I try to reinstall the win10, the problem solved TEMPORARY
after several reboot it comes again
I never thought It could be windows update problem
I have tried to uninstall the update "KB4507453" & "KB4506991" but doesn't work
the KB4509096 cannot be removed and I tired to install OS 3rd times
so I just waiting for software update...
BTW corsair link is also down with aura service, it would be same problem

[Brighttail]

The BIOS/firmware version for your hardware.
1.7.66 and tred 1.7.35

2. The AURA SYNC products you own and any other 3rd-party lighting software.
Asus spatha, Asus Rampage 6, Crosair fans and lighting but those are turned off

3. If a power cycle has made any difference. (Shutdown, power off, unplug power cable for a minute)
Power cylce does nothing

4. If you have tried reinstalling Aura or Windows already.
Done both multiple times. I can get earlier versions of 1.3.xx and 1.4.xx, they work fine, come right just no customization available. I can turn them on or off in default.

5. Do you have Aura for Graphics Cards installed also. (Please uninstall)
None
6. Windows Edition, Version, and OS build.
Windows 10 Pro - build 1903 - 18362.239
7. If the same issue was present in the previous version(s).
Last 6 versions
8. State clearly the issue(s) you are experiencing.
Please Include a screenshot of the Aura UI, and any other pictures if applicable.
I have read many of these forum posts. I have:
- uninstall all my asus and corsair software, completely
- Ran Revo and CCleaner and Asus Aura uninstaller, multiple times
- Installed an earlier version and tried to update, nothing happens.
- Try to start up Aura when computer starts using Run as Administarter which I did the same for installing it.
- Tried installing it on a drifferent drive
- Complete fresh install, only MB (no live dash) and no asus loaded.

All basiically leaves me sometimes, nothing coming up at all, some there there is a different program interfering and the always fun I don't have admin permisions.

Nothing works and I'm done with it. So good luck . My 24 computers coming in end of next month will not have Asus Aura on it and may have gigabyte MB / GPU and maybe eVGA. I will use Corsair RAM and lighting service.

Thanks admin for doing pretty much no easy installs or fixes for us. I wish you had a vanilla install. No RAM, no GPU, no SSDs for RGB. Just moherboard and the headers.

[scottishrebel]

1. The BIOS/firmware version for your hardware.
Aura - 1.07.60 and 1.07.66
BIOS - 0702

2. The AURA SYNC products you own and any other 3rd-party lighting software.
Asus Crosshair VIII Hero
Asus GTX 1080Ti Strix OC

3. If a power cycle has made any difference. (Shutdown, power off, unplug power cable for a minute)
Nope

4. If you have tried reinstalling Aura or Windows already.
Reinstalled Aura many times and different versions too aswell uninstalling all other lighting software. Reinstalling windows for the sake of one program crashing is ludicrous.

5. Do you have Aura for Graphics Cards installed also. (Please uninstall)
Did have but been uninstalled since trying to get Aura working.

6. Windows Edition, Version, and OS build.
OS Name Microsoft Windows 10 Pro
Version 10.0.18362 Build 18362

7. If the same issue was present in the previous version(s).
Tried 1.07.60 and 1.07.66 and get same reult.

8. State clearly the issue(s) you are experiencing.
Aura will not launch at all resulting in standard Windows "Program has stopped responding" error. This is my first time ever trying to use the software after building a new PC with x570 and Ryzen 3900x.

[sh000kz]

1. The BIOS/firmware version for your hardware.
Maximus XI Extrme Version 1105

2. The AURA SYNC products you own and any other 3rd-party lighting software.
Maximus XI extreme, rog horus rgb keyboard, rog spatha mouse, ddr4 trident ram

3. If a power cycle has made any difference. (Shutdown, power off, unplug power cable for a minute)
no

4. If you have tried reinstalling Aura or Windows already.
yes both, try to use ccleaner and revo uninstaller (lol reinstall os because of a crapy software) this include the few rgb led setups for patriot and others and the lightning service

5. Do you have Aura for Graphics Cards installed also. (Please uninstall)
no

6. Windows Edition, Version, and OS build.
windows 10 1903

7. If the same issue was present in the previous version(s).
yes

8. State clearly the issue(s) you are experiencing.
aura sync can not start because of auraservice is not available

i try aura sync version from Version : 1.06.17 to Version : 1.07.71 i have reflashed my bios to be sure to update the rgb firmware
multiple reinstall windows 10, with driver for chipset and co, without chipset and co but still not able to start aura sync, sometimes aura sync start (only 2 times) but in this case aura sync only find the trident ddr rgb leds...and yes i try to disable and enable the leds in bios with s4+s5 state and apm

[wim-bart]

If you need to report any issues after installing 1.07.35, please remember to mention the following to make debugging faster:
1. The BIOS/firmware version for your hardware.
ASUS Prime X370-Pro - BIOS 4207
ASUS ROG Strix R580-TOP - BIOS Stock
2. The AURA SYNC products you own and any other 3rd-party lighting software.
ASUS Prime X370-Pro - BIOS 4207
ASUS ROG Strix R580-TOP - BIOS Stock

iCue for Corsair Memory, Corsair AIO, Corsar Lightning Node Pro, Corsair RGB strips, Corsair Fans, Corsair K95, Corsair Mouse, Corsair MM600. (all RGB)

3. If a power cycle has made any difference. (Shutdown, power off, unplug power cable for a minute)
Yes, multiple times
4. If you have tried reinstalling Aura or Windows already.
Yes, multiple times
5. Do you have Aura for Graphics Cards installed also. (Please uninstall)
No.
6. Windows Edition, Version, and OS build.
Windows 10 Professional 1803, 1809, 1903 - All Work without updates!
Windows 10 Enterprise 1803, 1903 - All Work without updates!

When patched using Windows patches after 17/03/2019 GPU does not show in Aura Software and GPU Tweak has issues controlling Fan's

7. If the same issue was present in the previous version(s).
No and yes.
Unpatched Windows No
Patched Windows Yes.

8. State clearly the issue(s) you are experiencing.
GPU Not showing in Aura.

[V1lle]

If you need to report any issues after installing 1.07.35, please remember to mention the following to make debugging faster:

1. The BIOS/firmware version for your hardware.
BIOS Version/Date American Megatrends Inc. 1802, 18/01/2019

2. The AURA SYNC products you own and any other 3rd-party lighting software.
ROG STRIX Z370-F GAMING
G.Skill Trident Z RGB, DDR4 3200MHz, CL16, 1.35V

3. If a power cycle has made any difference. (Shutdown, power off, unplug power cable for a minute)
No

4. If you have tried reinstalling Aura or Windows already.
Yes

5. Do you have Aura for Graphics Cards installed also. (Please uninstall)
No

6. Windows Edition, Version, and OS build.
Windows 10 Pro Build 17763

7. If the same issue was present in the previous version(s).
Yes

8. State clearly the issue(s) you are experiencing.
Asus LightingService prevents CPU to drop clock speed and to enter sleep mode when idling if set to anything else but "static" mode. When I switch back to "static" mode the CPU clock drops down where it should be when idling and computer can now be entered to sleep mode.

Please Include a screenshot of the Aura UI, and any other pictures if applicable.[/QUOTE]

[1mluer]

If you need to report any issues after installing 1.07.35, please remember to mention the following to make debugging faster:

1. The BIOS/firmware version for your hardware.
BIOS Version/Date American Megatrends Inc. 1802, 18/01/2019

2. The AURA SYNC products you own and any other 3rd-party lighting software.
ROG STRIX Z370-F GAMING
G.Skill Trident Z RGB, DDR4 3200MHz, CL16, 1.35V

3. If a power cycle has made any difference. (Shutdown, power off, unplug power cable for a minute)
No

4. If you have tried reinstalling Aura or Windows already.
Yes

5. Do you have Aura for Graphics Cards installed also. (Please uninstall)
No

6. Windows Edition, Version, and OS build.
Windows 10 Pro Build 17763

7. If the same issue was present in the previous version(s).
Yes

8. State clearly the issue(s) you are experiencing.
Asus LightingService prevents CPU to drop clock speed and to enter sleep mode when idling if set to anything else but "static" mode. When I switch back to "static" mode the CPU clock drops down where it should be when idling and computer can now be entered to sleep mode.

Please Include a screenshot of the Aura UI, and any other pictures if applicable.

[/QUOTE]

I have found 2 things about the lighting service. If it is not enabling you need to restart the service and it will lower your cpu utilization to almost nothing like it should be. AND if you use rainbow or other color controls it will raise your cpu utilization to what you are seeing. I think it's a bug when you use other color patterns. If you set that to "color cycle" and not any other setting it will also go to almost 0 utilization like it should for all colors. I think it's buggy software that is not optimized.

Try changing everything to "color cycle" and see what happens to your utilization. It will drop. I have mentioned this 1000 times. It's a black hole out there.

[$heriff]

If you need to report any issues after installing 1.07.35, please remember to mention the following to make debugging faster:
1. The BIOS/firmware version for your hardware.
ASUS Prime X370-Pro - BIOS 4207
ASUS ROG Strix R580-TOP - BIOS Stock
2. The AURA SYNC products you own and any other 3rd-party lighting software.
ASUS Prime X370-Pro - BIOS 4207
ASUS ROG Strix R580-TOP - BIOS Stock

iCue for Corsair Memory, Corsair AIO, Corsar Lightning Node Pro, Corsair RGB strips, Corsair Fans, Corsair K95, Corsair Mouse, Corsair MM600. (all RGB)

3. If a power cycle has made any difference. (Shutdown, power off, unplug power cable for a minute)
Yes, multiple times
4. If you have tried reinstalling Aura or Windows already.
Yes, multiple times
5. Do you have Aura for Graphics Cards installed also. (Please uninstall)
No.
6. Windows Edition, Version, and OS build.
Windows 10 Professional 1803, 1809, 1903 - All Work without updates!
Windows 10 Enterprise 1803, 1903 - All Work without updates!

When patched using Windows patches after 17/03/2019 GPU does not show in Aura Software and GPU Tweak has issues controlling Fan's

7. If the same issue was present in the previous version(s).
No and yes.
Unpatched Windows No
Patched Windows Yes.

8. State clearly the issue(s) you are experiencing.
GPU Not showing in Aura.

I initially saw the same issue when first installing my Strix card; after 1 or 2 reboot cycles Aura was able to see the card and configure the lights.