Page 45 of 45 FirstFirst ... 35 43 44 45
Results 441 to 445 of 445
  1. #441
    ROG Member Array
    Join Date
    Aug 2015

    Exclamation Update Armory Crate RGB conflicts, thx

    Reposting because it appears that nobody cared in the Armory Crate thread:

    A lot of people are experiencing the following symptoms:

    random signal loss
    random display driver crashing
    display turns off and on
    monitor turns off and on randomly
    display crashes
    game crashing
    Event ID 14 "nvlddmkm"
    nvlddmkm windows log

    It has been reported that Videocard RGB software is causing this issues and or Stable electrical outlet delivering enough electrical power to your computer.
    Hi, had the same issue and for me solution was to turn off led light synchronisation of my motherboard (Asus) with EVGA 2080ti FTW3. I have Armoury Crate installed and there is a section that you can select which devices you want to control via AURA SYNC. Simply don't select graphic card and everything works fine.
    Armoury Crate
    EVGA 2080Ti FTW3 Ultra - 461.72
    Precision X1 - 1.1.7
    Windows 10 Pro build 20H2

    Hope that will help.
    i think i have fixed my issue, ASUS Armoury Crate can control RGB to the video card, disable control and no issue, at least for the last three days.
    Hey I am reposting to help you guys out with the nvlddmkm crashes as I had an extremely hard time figuring out the issues after RMA the card, replacing power supply, and attempting a lot of software troubleshooting including installing new windows 10 on 2 ssd's and problem continued until I did the following:

    So what I did was change the Monitor power cord to my Main Surge Protector+battery, I know it's weird but I had it connected to Another port in the surge protector where it wasn't really protected and only pulled current from the main electrical outlet therefore causing problems sending a steady current to my system?. I have the cyberpower LX1500GU so perhaps it was causing not the pull the correct Electrical Current? it was based on a guys post from Tom's Hardware
    Quote from the post:

    "TL;DR See if you have to much power being used (from lots of plugs from devices) on your surge protector, and use less devices on the surge protector, or split them up on a different surge protector on a different plug (or put monitors only on their own surge protector) That fixed my issue."
    ^So that fixed my issue

    In addition I did also Restored default settings for this power plan under windows 10 "Edit Power Plan Settings"
    based on another link when you google " Fixing the Nvlddmkm Error (Display Driver Stopped Responding and Has Recovered) " it should be the first link.
    Also Always keep your windows 10 up to date! Check for updates!
    Oh also Krezo suggested that Asus Armory Crate fixed his problem by deselecting graphics card from Aura Sync in Sync devices.
    so for anyone experiencing this nvlddmkm it might be due to your electrical outlet not pulling enough power correctly to steadily run your computer. I would suggest try connecting a few things separated even if it means running an extension cord for your monitors or devices. Or perhaps connect your equipment to another electrical outlet? not sure but it's worth a try with the addition of Restoring default power plan settings in windows, I hope this helps you as I struggled for months.
    This honestly fixed everything. Moved some things to a different socket and decreased the amount of things on the surge protector and that fixed everything.

    Can run both my monitors and everything without any crashes on anything or anything.

    Thank you so much, I didn't even consider the problem being the amount of stuff in one surge protector.
    I also experienced intermittent black screens. Considering that I have recently installed Corsair new version of iCUE, which can control the RGB of EVGA, I decided to turn it off for a period of time to test if this is caused.
    I have this same exact problem with my 2080 Super. I have DDU'd the drivers rolled them back to different versions but the random black outs (that crash any programs as well) occur. I can make the blackouts happen straight away when I run the X1 precision software and have also tried uninstalling this but problem persists.

    The only workaround is to go to device manager, right click on your GPU and select uninstall and tick the box to remove drivers. Reboot and the machine and wait until Windows automatically installs a driver. It is an old driver but it works for about 5 days to a week then you have to do the same thing again.
    I have an RMA but after reading your post don't think a replacement card will help so going to try uninstalling Armoury crate and disable RGP control to see if that helps. Will let you know how that works out.
    EDIT:- After removing Armoury Crate there have been no further blackouts. I went into bios first and disabled the automatic installation of Armoury Crate and then un-installed AC from the computer and everything is fine now. I think the problem lies with AC RGB control was doing the crashing..

  2. #442
    ROG Member Array Affekt1 PC Specs
    Affekt1 PC Specs
    Motherboardasus rog z390 maximus XI apex
    Processorintel core i9 9900k
    Memory (part number)g.skill trident z rgb f4-3200c14d-32GTZR
    Graphics Card #1asus rtx 3080 rog strix oc
    Sound Cardcreative sound blaster z
    Monitoracer predator xb271hut tobii
    Storage #1ocz vertex 4 256 gb, samsung evo 860 2tb
    Storage #2wd ultrastar 2tb
    CPU Coolerthermaltake water 3.0 riing rgb 360
    Casecooler master h500m
    Power Supplythermaltake toughpower grand rgb 1050w platinum
    Keyboard logitech g513 carbon linear switch
    Mouse logitech g403 prodigy wireless
    Headset/Speakers presonus eris e4.5
    OS windows 10 pro 64

    Join Date
    Nov 2020

    The latest version of the Aura Sync utility 1.07.84 does not see the illumination of the profile motherboard and thermaltake case fans.

  3. #443
    ROG Member Array
    Join Date
    Feb 2021

    the latest version of the Aura Sync utility 1.07.84 does not recognizing my rog maximus xi hero mb lightening.
    i had to roll back to older version 1.07.79.v2 to make it work again.
    i raised this issue many times and no one care.
    armoury crates also dosnt recognize my mb rgb lightening anymore.
    please fix this.

  4. #444
    New ROGer Array kevtro PC Specs
    kevtro PC Specs
    ProcessorIntel Core i9-9900K
    Memory (part number)CORSAIR DOMINATOR PLATINUM RGB 32GB (4 x 8GB) DDR4 DRAM 3600MHz C18
    Graphics Card #1NVIDIA GeForce RTX 3090 24GB GDDR6X PCI Express 4.0 Graphics Card - Titanium and Black
    MonitorASUS ROG Strix XG438Q
    Storage #1Samsung 970 EVO NVMe M.2 SSD 1TB
    Storage #2Samsung 860 EVO SATA M.2 SSD 1TB
    CPU CoolerCorsair Hydro Series H115i RGB PLATINUM 280mm Liquid CPU Cooler
    CaseCorsair Obsidian Series 750D Airflow Edition Full Tower ATX Case
    Power SupplyCorsair RMi Series RM1000i — 1000 Watt 80 PLUS Gold Certified Fully Modular PSU
    Keyboard Corsair K70 RGB MK.2 Mechanical Gaming Keyboard — CHERRY MX Red
    Mouse Corsair DARK CORE RGB PRO SE Wireless Gaming Mouse
    Headset Corsair VIRTUOSO RGB WIRELESS SE High-Fidelity Gaming Headset — Gunmetal
    Mouse Pad Corsair MM700 RGB Extended Mouse Pad
    OS Windows 10 Pro 20H2 19042.928

    Join Date
    Oct 2018

    Quote Originally Posted by Peyman1354 View Post
    the latest version of the Aura Sync utility 1.07.84 does not recognizing my rog maximus xi hero mb lightening.
    i had to roll back to older version 1.07.79.v2 to make it work again.
    i raised this issue many times and no one care.
    armoury crates also dosnt recognize my mb rgb lightening anymore.
    please fix this.
    I am having the same issue as well. .84 does not work with my x code but .79 v2 does.

  5. #445
    New ROGer Array Darkprog PC Specs
    Darkprog PC Specs
    MotherboardAsus TUF Gaming B450m-PLUS
    ProcessorRYZEN 5 2600
    Memory (part number)8x4 32GB crossair 3000mhz
    Graphics Card #1Msi RTX 2060 Gaming Z
    MonitorAsus VG278QR Gaming
    CPU CoolerColer Master Master Luquid ML240L
    CaseMSİ Vampiric 010
    Power SupplyRampage 80+ 850 watt
    Keyboard Logitech
    Mouse Logitech g300s
    Headset Rampage
    Accessory #1 Logitech G29 + shifter

    Join Date
    May 2021

    Thank you so much i fixed

    mutter porno

Page 45 of 45 FirstFirst ... 35 43 44 45

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts