Results 1 to 2 of 2
  1. #1
    New ROGer Array ziopanna PC Specs
    ziopanna PC Specs
    MotherboardASUS ROG Strix B450-I GAMING
    ProcessorAMD Ryzen 7 2700
    Memory (part number)Corsair C15 3000MHz DRAM DDR4 32GB (VENGEANCE® LPX (CMK32GX4M2B3000C15)
    Graphics Card #1AMD Radeon RX 590 Nitro+ 8GB Special Edition
    Storage #1Samsung SSD 970 EVO Plus M.2 NVMe
    CPU CoolerCorsair Hydro Series™ H60 (2018) 120mm Liquid CPU Cooler
    CaseFractal Node 304
    Power SupplyEnermax Revolution SFX 650W

    Join Date
    Feb 2019

    Corsair H60 AIO cooler setup and Corsair Vengeance LPX ram timings

    Hello everyone,
    I've just build a new PC with this configuration:

    FD-CA-NODE-304-BL | Fractal | Node 304
    90MB0Z50-M0EAY0 | ASUS | ROG Strix B450-I GAMING
    YD2700BBAFBOX | AMD | Ryzen 7 2700
    11289-01-20G | Sapphire | Radeon RX 590 Nitro+ 8GB Special Edition
    CW-9060036-WW | Corsair | Hydro Series™ H60 (2018) 120mm Liquid CPU Cooler
    CMK32GX4M2B3000C15 | Corsair | C15 3000MHz DRAM DDR4 32GB (VENGEANCE® LPX

    ERV550SWT | Enermax | Revolution SFX 650W
    MZ-V7S500BW | Samsung | SSD 970 EVO Plus M.2 NVMe

    I've a couple of questions regarding the CPU cooler and the RAM timings:

    - CPU cooler
    I've connected the pump 3pin connector to the CPU_FAN slot and the fan 4pin connector to the AIO_FAN, is it right? How do I have to setup Qfan and che AIO_FAN in BIOS?

    - RAM
    The SPD auto setup the RAM speed to 2133Mhz. I've increased the target speed to 3000Mhz but the timings are different from what Corsair sais. Do I have to change it manually? Corsair tested timings are 15-17-17-35 but in BIOS there are a lot of value.

    Thanks in advance for your help and sorry for my English

    Best regards.

  2. #2
    ROG Guru: Brown Belt Array davemon50 PC Specs
    davemon50 PC Specs
    Laptop (Model)Asus G752VY-DH72 (17") and Asus G752VT-DH74 (17")
    MotherboardAsus ROG LGA2011-v3 Rampage V Edition 10, x99 EATX
    ProcessorIntel Core i7-6950X Extreme 10-core 25MB Cache 3.0 GHz
    Memory (part number)Corsair Vengeance LPX Red DDR4 DRAM 64GB-4x16 3333 (CMK64GX4M4B3333C16R)
    Graphics Card #1Sapphire Nitro Radeon R9 Fury 4GB HBM Backplate
    Graphics Card #2Sapphire Nitro Radeon R9 Fury 4GB HBM Backplate
    Sound CardAsus SupremeFX Hi-Fi Audio DAC
    Monitor(2) Dell UltraSharp U2515H 25-inch monitors
    Storage #1(4) SSD's - Samsung 960 & 970 1TB M.2, Intel 535 480G, Intel 510 250G
    Storage #2(3) HDD's - Western Digital Caviar Black 2TB 3.5-in SATA III 64MB Cache
    CPU CoolerCorsair Hydro Series H80
    CaseCorsair Obsidian Series 650D Black, ATX, Mid Tower
    Power SupplyCorsair Digital AXi-Series AX1200i (1200W) 80+ Platinum Rating
    Keyboard Logitech Wireless K360
    Mouse Logitech Wireless MX Anywhere 2
    Headset HyperX Cloud II
    OS Windows 10 Pro 64-Bit
    davemon50's Avatar
    Join Date
    Apr 2017

    Yeah for H60 I believe the fan goes straight to the board. I don't have that model but with the H80 for example you could connect the fans to the pump housing for control. With your H60 I don't think there's a connection on the pump housing for the cooler's fan, so you've got it ok by connecting on the AIO header. In BIOS (or AI Suite) set it up so you control the fan speed on CPU temperature. That's one of the smaller capacity coolers so I'd recommend you start by being more agressive and using higher fan speeds earlier on the temperature curve. Then you can step back a bit (lower speeds more) if you find it's cooling more than you really need and if you want to lower sound levels of the fan.

    CPU_FAN header is right for the pump. If not, you will get warnings from the motherboard that you have no CPU cooling.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts